D.E.H.®

D.E.H.® 043L curing agent is a modified cycloaliphatic polyamine used as curing agent for epoxy resins. It has good color stability and produces light resistant products. It also has high acid and solvent resistance, excellent early water spot resistance and offers long pot life.

D.E.H.® 1501 Epoxy Curing Agent is a formulated polyaminoamide based curing agent for epoxy resins. The product contains no VOC according to the European Directive 2004/42/EC and no alkyl phenol.

D.E.H.® 20 Epoxy Curing Agent is an economical, liquid diethylenetriamine (DETA) aliphatic polyamine hardener that provides a short pot-life and cures in minutes with standard unmodified liquid epoxy resins. D.E.H.® 20 Epoxy Curing Agent is used for civil engineering applications, maintenance paints, and in the manufacture of epoxy-amine adducts. It is also used in adhesives, epoxy composite applications and as an accelerator for polyamide curing agents. In electrical applications, D.E.H.® 20 Epoxy Curing Agent is used for casting, potting and encapsulation.

D.E.H.® 24 Epoxy Curing Agent is an economical liquid aliphatic polyamine hardener, triethylenetetraamine (TETA), that offers a short pot-life and cures in minutes with standard unmodified liquid epoxy resins. Similar to D.E.H.® 20 Epoxy Curing Agent, it provides lower vapor hazard to workers due to its higher boiling point. D.E.H.® 24 Epoxy Curing Agent is used for maintenance paints, the manufacture of epoxy-amine adducts, in adhesives, and civil engineering applications. It is also used as an accelerator for polyamide curing agents. In electrical applications, D.E.H.® 24 Epoxy Curing Agent is used for casting, potting and encapsulation.

D.E.H.® 26 Curing Agent is an economical liquid aliphatic polyamine hardener, tetraethylenepentamine (TEPA), that offers a short pot-life and cures in minutes with standard unmodified liquid epoxy resins. Similar to D.E.H.® 24 Epoxy Curing Agent in application, it provides lower vapor hazard to workers due to its higher boiling point. D.E.H.® 26 Epoxy Curing Agent is used for maintenance paints, the manufacture of epoxy-amine adducts, in adhesives, and civil engineering applications. It is also used as an accelerator for polyamide curing agents. In electrical applications, D.E.H.® 26 Curing Agent is used for casting, potting and encapsulation.

D.E.H.® 2720 Epoxy Curing Agent is a high viscosity, modified cycloaliphatic polyamine based curing agent for epoxy resins. It contains no benzyl alcohol and no alkyl phenol.

D.E.H.® 29 Epoxy Curing Agent is an economical, liquid, complex mixture of linear, branched and cyclic ethylene amines. D.E.H.® 29 Epoxy Curing Agent offers more flexibility versus DETA,TETA, and TEPA type materials. It is recommended for epoxy coal tar systems, patch kits,two-pack adhesives, and other applications where color is not a limitation. In adhesives,D.E.H.® 29 Curing Agent yields much higher peel strength than DETA or TETA at comparable gel times and lower cost.

D.E.H.® 290 curing agent is a light colored modified aliphatic amine hardener that is used to cure epoxy resins. D.E.H.® 290 amine curing agent provides a quick return to service, low modulus, and relatively good color stability. Flexible epoxy membranes can be formulated using D.E.H.® 290 curing agent.

D.E.H.® 39 Epoxy Curing Agent is a liquid cycloaliphatic polyamine curing agent. D.E.H.® 39 Resin is a low viscosity aliphatic polyamine based on aminoethylpiperazine (AEP). D.E.H.® 39 Curing Agent provides a short pot-life and cures in minutes with liquid epoxy resins. Similar in application to D.E.H. 20, 24, 26 and 29 Epoxy Curing Agents, D.E.H.® 39 Curing Agent is used for maintenance paints, the manufacture of epoxy-amine adducts, in adhesives, civil engineering applications and as an accelerator for polyamide curing agents. In electrical applications, D.E.H.® 39 Curing Agent is used for casting, potting and encapsulation. D.E.H.® 39 Curing Agent is often used for epoxy composite materials.

D.E.H.® 4042 Epoxy Curing Agent is a modified cycloaliphatic polyamine based curing agent for epoxy resins, with a very long potlife.

D.E.H.® 4044 Epoxy Curing Agent is a fast curing, modified cycloaliphatic polyamine based curing agent for epoxy resins.

D.E.H.® 444 Epoxy Curing Agent is a low viscosity modified cycloaliphatic amine based curing agent for epoxy resins.

D.E.H.® 445 Epoxy Curing Agent is a modified cylcoalipatic amine based curing agent for epoxy resins. It contains no nonylphenol.

D.E.H.® 445L cycloaliphatic polyamine hardener is used as curing agent for epoxy resin. It offers low tendency to yellowing when exposed to UV irradiation, low viscosity and long pot life.

D.E.H.® 4723 Epoxy Curing Agent is modified cycloaliphatic polyamine curing agent for epoxy resins.