Enhanced TDS
Identification & Functionality
- Chemical Family
- Fluids & Lubricants Functions
- Function
- Film Former, Corrosion Inhibitor
- Product Code
- MITM08056
- Technologies
- Product Families
Features & Benefits
- Fluids & Lubricants Features
Applications & Uses
- Fluids & Lubricants End Use
- Markets
- Applications
- Product Applications
Additin® M 41.002 is an excellent film forming agent. It was developed specifically for use in rust preventatives based on mineral oils or solvents. Additin® M 41.002 has a light color, low odor compared to other film formers like oxidized paraffins. When blended with a solvent it leaves a waxy, dry, protective and non-staining thin film for excellent indoor and outdoor rust protection in high humidity environments. Blending with base oil leaves a softer oily film with similar properties. Additin® M 41.002 is non-emulsifiable and alkali resistant and also provides good boundary lubrication for forming operations.
Properties
Packaging & Availability
- Packaging Type
- Product Packaging
440lb bunghole drums
Storage & Handling
- Storage Conditions
Stored in a cool and dry place 6 months
Other
- Acid Value
- max. 1.0 mg KOH/g
- Appearance
- Light brown waxy solid
- Barium Content
- 3.8 %(W/W)
- Color (SDS)
- Brown, light
- Density
- 0.98 g/cm³
- Flash Point
- min. 170.0 °C
- Flash Point
- min. 170.0 °C
- Flash Point (SDS)
- min. 170.0 °C
- Insoluble in (SDS)
- Cold water
- Item Number
- Melting Point
- 35.0 °C
- Melting Point (SDS)
- 35.0 °C
- Odor (SDS)
- Mild
- Principal
- Shelf Life
- 6.0 mo
- Specific Gravity (SDS)
- 0.98
- Viscosity (SDS)
- 0.035 cm²/s
- Chemical Properties
Value Units Test Method / Conditions Acid Value max. 1.0 mg KOH/g mg KOH/g ASTM D974 At 45°C - Shelf Life & Stability
Value Units Test Method / Conditions Shelf Life 6.0 mo mo - Physical Properties
Value Units Test Method / Conditions Density 0.98 g/cm³ g/cm³ At 15.5°C Flash Point min. 170.0 °C °C Cleveland Open Cup Flash Point min. 170.0 °C °C ASTM D92 Melting Point 35.0 °C °C - Material Composition
Value Units Test Method / Conditions Barium Content 3.8 %(W/W) %(W/W) ASTM D3712 - SDS Physical and Chemical Properties
Value Units Test Method / Conditions Flash Point (SDS) min. 170.0 °C °C Melting Point (SDS) 35.0 °C °C Specific Gravity (SDS) 0.98 - Viscosity (SDS) 0.035 cm²/s cm²/s