Enhanced TDS
Identification & Functionality
- Blend
- No
- Chemical Family
- Plastics & Elastomers Functions
- Polymer Name
- Product Code
- MITM16521
- Single Ingredient
- Yes
- Technologies
- Product Families
Features & Benefits
- Materials Features
- Product Features and Benefits
- Easy processability
- Very good mechanical properties
- High abrasion resistance
- Stable modulus with moist environment
- Remarkable physical resistance
- Lightest engineering
- Polymers
- Low water absorption
- Very good chemical resistance
- High aging resistance
- Wide range of temperature use
Applications & Uses
- Plastics & Elastomers End Uses
- Plastics & Elastomers Processing Methods
- Markets
- Applications
- Processing Information
Machine General All injection molding machines suitable for polyamides can run the Agimid® 210 N000 Screw Types Screws with three zones (feeding, compression and metering zones) are recommended. Length: 18 D - 22 D
Material Drying Agimid® 210 N000 is dried and packed with a moisture content of less than 0.10 %. If the packing has been damaged or left open for a long time (>2 hours), then the material has to be dried. Polyamides are sensitive to oxidation at temperatures > 80°C in the oxygen atmosphere. To avoid yellowing of the granules (for natural color grades only), it is recommended to respect the following settings.
Drying Settings - Air Dryer
- Temperature: max. 80°C
- Time: 4 - 8 hours
- Vacuum Dryer
- Temperature: max. 80°C
- Time: 2 - 4 hours
Lubrication Agimid® 210 N000 includes internal lubricants. However, the use of Zinc Stearate or Calcium Stearate can be helpful in case of process instability.
Process (Recommended Basic Settings) Basic Machine Settings Feeding zone 210 - 240°C
Compression zone 220 - 250°C
Metering zone 220 - 250°C
Nozzle 220 - 250°C
Melt 220 - 250°CMold Temperature 10 - 40°C - Air Dryer
Properties
- Physical Form
- Soluble In
Principal Information
- Group Principal Number
- S000003
- Principal
Storage & Handling
- Storage Condition
Agimid® 210 N000 has to be stored in dry, indoor and safe facilities. It is highly recommended to run granules having reached the workshop temperature to prevent from moisture condensing on cold granules.
Other
- ADR/RID/ADN Proper Shipping Name
- Not Applicable
- ADR/RID/ADN UN Number
- Not Applicable
- Appearance (SDS)
- Granules
- Color (SDS)
- Characteristic natural
- Flammable Nature (SDS)
- Non flammable
- IATA/ICAO Proper Shipping Name
- Not Applicable
- IATA/ICAO UN Number
- Not Applicable
- IMO/IMDG Proper Shipping Name
- Not Applicable
- IMO/IMDG UN Number
- Not Applicable
- Insoluble in (SDS)
- Water
- Item Number
- Odor (SDS)
- Characteristic
- Other Hazards
- If the product is handled or used at high temperature, contact with hot product or vapours may cause burns. At high concentrations, the vapours can be irritating to the respiratory system. Prolonged and repeated skin contact may cause reddening, irritation and dermatitis.
- Temperature Control
- No
- USA/DOT UN Number
- Not Applicable
- Electrical Properties
Value Units Test Method / Conditions Dielectric Strength 28.0 kV/mm ASTM D149 as dry state - Mechanical Properties
Value Units Test Method / Conditions Charpy Impact Strength 5.0 kJ/m² ISO 179 at 23°C, notched Charpy Impact Strength 6.0 kJ/m² ISO 179 at -30°C, notched Elongation at Break min. 100.0 % ISO 527 Tensile Modulus 1350.0 MPa ISO 527 Tensile Strength at Break 46.0 MPa ISO 527 - Physical Properties
Value Units Test Method / Conditions Density 1.01 g/cm³ ISO 1183 at 23°C Melting Point 178.0 °C ISO 11357-1 Water Absorption 1.4 % Internal Method at 23°C, with 100% relative humidity Water Absorption 0.7 % Internal Method at 23°C, with 50% relative humidity - SDS Physical and Chemical Properties
Value Units Test Method / Conditions Boiling Point (SDS) 314.0 °C Density (SDS) 1.02 g/L Melting Point (SDS) 168.0-178.0 °C - Shelf Life & Stability
Value Units Test Method / Conditions Shelf Life 0.0 d - Thermal Properties
Value Units Test Method / Conditions Heat Deflection Temperature 120.0 °C ISO 75 at 0.45 MPa Heat Deflection Temperature 50.0 °C ISO 75 at 1.85 MPa