Enhanced TDS
Identification & Functionality
- Basestock
- Chemical Family
- Product Code
- MITM14771
- RTU Product Type
- Technologies
- Product Families
Features & Benefits
- Ready-to-Use Product Features
- Product Benefits
• Excellent High Temperature Stability
• Very Low Deposit and Coking Tendencies
• Very Low Evaporation and Volatility
• High Fire and Flash Points
• Excellent Wear Protection
• Energy Efficient Lubrication
Applications & Uses
- Application Area
- Markets
- Applications
- Product Applications
• Lithographic and Pin Chain Ovens
• Stenter Frame Chains
• Fiberglass Curing Ovens
• Roller Chains in Conveyor Ovens
• Kiln Car Bearings and Rollers
• High Temperature Greases
• Sealed for Life Applications
Properties
Safety & Health
- Safety Precautions
Wear appropriate personal protective equipment and follow good industrial hygiene practices.
Packaging & Availability
- Packaging Type
Principal Information
- Group Principal Number
- S000008
- Principal
Storage & Handling
- Storage and Shelf Life Information
Storage- Esters may absorb moisture from the air. Store at room temperature in a tightly sealed container.
Shelf Life- 36 months when stored and handled as recommended.
Other
- Appearance
- Slightly cloudy dark amber liquid
- Appearance (SDS)
- Viscous
- Color (SDS)
- Amber to orange
- Flammable Nature (SDS)
- Not flammable
- Insoluble in (SDS)
- Water
- Item Number
- Odor (SDS)
- Characteristic
- Other Hazards
- None known
- USA/DOT UN Number
- Not Applicable
- Chemical Properties
Value Units Test Method / Conditions Acid Number max. 0.6 mg KOH/g mg KOH/g ASTM D664 Acid Number max. 0.6 mg KOH/g mg KOH/g ASTM D974 - Shelf Life & Stability
Value Units Test Method / Conditions Shelf Life 1095.0 d d - Mechanical Properties
Value Units Test Method / Conditions Scar Diameter 0.45 mm mm ASTM D4172 at 75°C, 1 hr, 1200 rpm, 40kg Scar Diameter 0.45 mm mm Four Ball Wear Test at 75°C, 1 hr, 1200 rpm, 40kg Weld Load min. 3000.0 lbs lbs Weld Load min. 3000.0 lbs lbs ASTM D3233 - Physical Properties
Value Units Test Method / Conditions Density 8.13-8.21 lb/gal lb/gal ASTM D4052 at 15.6°C Evaporation Loss 1.0 % % ASTM D972 at 204°C, 6.5hr, by weight Evaporation Loss 4.5 % % Oven Method at 260°C, 1hr, by weight Fire Point 360.0 °C °C ASTM D92 Flash Point min. 299.0 °C °C Cleveland Open Cup Flash Point min. 299.0 °C °C ASTM D92 Moisture Content 0.02 %(W/W) %(W/W) ASTM D1533 Pour Point -37.0 °C °C ASTM D5950 Pour Point -37.0 °C °C ASTM D97 Viscosity 15.0-16.5 cSt cSt ASTM D445 at 100°C Viscosity 135.0-165.0 cSt cSt ASTM D445 at 40°C - SDS Physical and Chemical Properties
Value Units Test Method / Conditions Density (SDS) 0.978 g/cm³ g/cm³ ASTM D4052 at 15.6°C Flash Point (SDS) min. 299.0 °C °C Kinematic Viscosity (SDS) 15.7 mm²/s mm²/s at 212°F Kinematic Viscosity (SDS) 150.0 mm²/s mm²/s At 104°F Pour Point (SDS) -37.0--35.0 °C °C Relative Density (SDS) 0.981 - Viscosity (SDS) 15.0-165.0 mPa.s mPa.s at 104 - 212°F