Bayferrox® 110G

Principal: Lanxess IPG

Pigment Type: Inorganic Pigments

Functions: Pigment

Color (Properties): Red

End Uses: Ceramics, Glass, Paper

Chemical Family: Iron & Iron Compounds

CI Name: Pigment Red 101

Enhanced TDS

Identification & Functionality

Features & Benefits

Labeling Claims

Applications & Uses

Properties

Color (Properties)
Physical Form
Note

⁵³ - Minor elements may arise from the raw materials used. However, these are firmly bound to the crystal lattice as ions.

Regulatory & Compliance

Quality Standards

Principal Information

Group Principal Number
S000008
Principal

Storage & Handling

Storage Conditions
  • Protect against weathering. Store in a dry place and avoid extreme fluctuations in temperature.Close bags after use to prevent the absorption of moisture and contamination.
  • This product has an excellent shelf life. We recommend that this product is used within ten years of the date of manufacture and limit our product warranty to this period. During the first ten years after the date of manufacture we are able to ensure compliance with this specification, provided the material has been stored as stated above and the packaging materials remain undamaged. It must be taken into account that the packaging mean can have a shelf life considerably shorter than the one for this product. All recommendations and warnings given on the packaging must strictly be adhered to. Deviations from storage conditions can lead to undesired changes on side of the packaging materials. These succumb to aging which may also lead to compromising their capability. Concerning their estimated service life we differentiate between the following packaging materials:
  • All kinds of bags (Paper and PE) - 5 years
  • All kinds of Bulk bag - 3 years. With respect to our Bulk Bags we recommend to avoid UV-radiation because the sewing material of the lifting loops is stabilized against degradation by UV-radiation for appr. 1000 h incident sun radiation for the climate of Central Europe. A more intense sun radiation can shorten this period significantly. In cases of doubt the lifting loops must be checked thoroughly.

Other

Appearance (SDS)
Powder
Color (SDS)
Red
Insoluble in (SDS)
Water
Odor (SDS)
Odorless
Other Hazards
None known
Temperature Control
No
USA/DOT UN Number
Not Applicable
Chemical Properties
ValueUnitsTest Method / Conditions
pH5.0-10.0-DIN EN ISO 787-9
Material Composition
ValueUnitsTest Method / Conditions
Alpha Ferric Oxide Contentmin. 97.8 %%
Optical Properties
ValueUnitsTest Method / Conditions
Color Differencemax. 1.5-Internal Method
Relative Tinting Strength95.0-105.0 %%Internal Method
Physical Properties
ValueUnitsTest Method / Conditions
Bulk Density1.0-1.4 g/mLg/mLDIN EN ISO 787-11
Densityapprox. 5.0 g/mLg/mLDIN EN ISO 787-10
Moisture Contentmax. 1.0 %%DIN EN ISO 787-2 after production
Setting Timemax. 60.0 mmDIN EN 196-3
Water Absorptionapprox. 33.0 g/100gg/100gDIN 55608
Water Solublesmax. 1.8 %%DIN EN ISO 787-3
SDS Physical and Chemical Properties
ValueUnitsTest Method / Conditions
Bulk Density (SDS)300.0-1000.0 kg/m³kg/m³
Density (SDS)5.0 g/cm³g/cm³At 20°C
Melting Point (SDS)min. 1000.0 °C°F
pH (SDS)4.0-8.0-concentration: 5 %
Shelf Life & Stability
ValueUnitsTest Method / Conditions
Shelf Life10.0 yryr