Enhanced TDS
Identification & Functionality
- Blend
- No
- Chemical Family
- Chemical Name
- Country of Origin
- Product Code
- MITM16930
- Product Functions
- Single Ingredient
- Yes
- Technologies
- Product Families
Features & Benefits
Applications & Uses
- Product End Uses
- Product Application
Bermocoll® CCA 098 is used in cement based tile fix and joint mortars for improvement of workability, consistency, and water retention. It prolongs the open time, and improves the final adhesion and strength. Bermocoll® CCA 098 should be admixed to the mortar in dry form before the water is added. Normal dosage is 0.3 - 0.5 % calculated on the dry mortar weight. Bermocoll® CCA 098 is also used as a thickener for water based systems when extremely high viscosity is required.The dissolving time of Bermocoll® CCA 098 is influenced by the pH of the solution.
Properties
- Physical Form
- Soluble In
Regulatory & Compliance
- Compliance (Regulatory)
Safety & Health
- Safety and Handling Information
At high temperatures and in contact with an open flame, Bermocoll® CCA 098 will burn slowly with the characteristics of cellulose.
Principal Information
- Group Principal Number
- S003175
- Principal
Storage & Handling
- Storage Information
- In unopened bags, Bermocoll® CCA 098 can be stored for several years.
- In opened bags, the moisture content of Bermocoll® CCA 098 will be influenced by the air humidity. At the temperatures above 250°C (480°F), charring of Bermocoll® CCA 098 will occur.
Other
- Appearance
- Whitish powder
- Appearance (SDS)
- powder
- Color (SDS)
- Off-white
- Dust Explosion Class (SDS)
- St1
- Flammability (SDS)
- Combustible Solids
- Item Number
- Odor (SDS)
- Odorless
- Other Hazards
- Dust can form an explosive mixture in air
- Protect from Freezing
- No
- Temperature Control
- No
- USA/DOT UN Number
- Not Available
- Chemical Properties
Value Units Test Method / Conditions pH 7.0 - 1% solution - Physical Properties
Value Units Test Method / Conditions Sieve Fractionation (Through) 98.0 % Below 500 μm Viscosity 8000.0-12000.0 mPa.s Brookfield LV Viscometer at 20°C, 1% solution - SDS Physical and Chemical Properties
Value Units Test Method / Conditions Autoignition Temperature (SDS) 120.0 °C EN 15188 Autoignition Temperature (SDS) min. 420.0 °C EN 50281 Autoignition Temperature (SDS) min. 450.0 °C EN 50281 auto-ignition of a 5mm dust layer Burning Number (SDS) 5.0 - Decomposition Temperature (SDS) min. 100.0 °C Deflagration Index (SDS) max. 200.0 bar.m/s Lower Explosion Limit (SDS) 30.0 g/m³ Minimum Ignition Energy (SDS) min. 10.0 mJ Viscosity (SDS) 8000.0-12000.0 mPa.s at 20°C, pH 7 at 1% solution pH (SDS) 5.0-9.0 - 0.5% solution - Shelf Life & Stability
Value Units Test Method / Conditions Shelf Life 0.0 d