Colortherm® Red 110 M

Principal: Lanxess IPG

Color (Properties): Red

Functions: Pigment

Pigment Type: Inorganic Pigments

Compatible Polymers & Resins: Acrylonitrile Butadiene Styrene (ABS), Cellulose Acetate Butyrate (CAB), High-Density Polyethylene (HDPE), Latex, Low-Density Polyethylene (LDPE), Poly(Methyl Methacrylate) (PMMA), Polyamides, Polycarbonates (PC), Polypropylenes (PP), Polystyrenes (PS), Polyurethanes (PU), Polyvinyl Chloride (PVC)

Chemical Family: Iron Oxides

CI Name: Pigment Red 101

Enhanced TDS

Identification & Functionality

Blend
No
CI Name
CI Number
Chemical Family
Chemical Name
Country of Origin
Pigment Type
Plastics & Elastomers Functions
Product Code
MITM07317
Single Ingredient
Yes
Technologies
Product Families

Features & Benefits

Applications & Uses

Properties

Color (Properties)
Physical Form
Note

¹- Minor elements may arise from the raw materials used. However, these are firmly bound to the crystal lattice as ions.

Packaging & Availability

Packaging Type

Principal Information

Group Principal Number
S000008
Principal

Storage & Handling

Storage Conditions
  • Protect against weathering. Store in a dry place and avoid extreme fluctuations in temperature.
  • Special conditions for opened packaging: Close bags after use to prevent the absorption of moisture and contamination.
  • If stored under the correct conditions (no climatic influence, kept dry and no extreme fluctuations in temperature) Colortherm® Red 110 M have an excellent shelf life. However, due primarily to the limited durability of the packaging, it is recommended that the product is used within 5 years of the date of manufacture and the product warranty is limited to this period.

Other

Appearance
Red pigment powder
Appearance (SDS)
Powder
Color (SDS)
Red
Insoluble in (SDS)
Water
Item Number
Odor (SDS)
Odorless
Other Hazards
None known
Temperature Control
No
USA/DOT UN Number
Not Applicable
Chemical Properties
ValueUnitsTest Method / Conditions
Loss on Ignitionmax. 0.7 %%DIN 55913 at 1000°C, 0.5h
pH5.0-8.0-DIN EN ISO 787-9
Material Composition
ValueUnitsTest Method / Conditions
Ferric Oxide Contentmin. 99.1 %%
Optical Properties
ValueUnitsTest Method / Conditions
Color Differencemax. 1.0-Delta E, Binder:Plasticised PVC, reduction with titanium dioxide (1: 5)
Color Scale-0.7-0.7 CIELABCIELABInternal Method Delta A, Binder:Plasticised PVC, reduction with titanium dioxide
Color Scale-0.7-0.7 CIELABCIELABInternal Method Delta B, Binder:Plasticised PVC, reduction with titanium dioxide(1:5)
Color Scale-0.7-0.7 CIELABCIELABInternal Method Delta H, Binder:Plasticised PVC, reduction with titanium dioxide (1 : 5)
Color Scale-0.5-0.5 CIELABCIELABInternal Method Delta L, Binder:Plasticised PVC, reduction with titanium dioxide
Relative Tinting Strength95.0-105.0 %%Reduction with titanium dioxide (1 : 5)
Physical Properties
ValueUnitsTest Method / Conditions
Density5.0 g/mLg/mLDIN EN ISO 787-10
Moisture Contentmax. 0.5 %%DIN EN ISO 787-2 after production
Oil Absorption25.0 g/100gg/100gDIN EN ISO 787-5
Particle Sizemax. 20.0 µmµm75 % in white spirit (dissolver mill base)
Particle Size0.09 µmµmScanning Electron Microscopy (SEM)
Sieve Fractionation (Retained)0.002 %%DIN 53195 45μm mesh
Tapped Bulk Density0.7-1.1 g/mLg/mLDIN EN ISO 787-11
Water Solublesmax. 0.5 %%DIN EN ISO 787-3
SDS Physical and Chemical Properties
ValueUnitsTest Method / Conditions
Bulk Density (SDS)300.0-1000.0 kg/m³kg/m³
Density (SDS)5.25 g/cm³g/cm³at 20°C
Melting Point (SDS)1565.0 °C°C
pH (SDS)4.0-8.0-at 5%
Shelf Life & Stability
ValueUnitsTest Method / Conditions
Shelf Life5.0 yryr