Enhanced TDS
Identification & Functionality
- Blend
- No
- CASE Ingredients Functions
- Chemical Family
- Chemical Name
- Country of Origin
- Function
- Reactive Diluent
- Product Code
- MITM00334
- Single Ingredient
- Yes
- Synonyms
- 2-Propenoic acid oxybis(methyl-2,1-ethanediyl)ester, Dipropylene Glycol Diacrylate
- Technologies
- Product Families
- Chemical Structure
Features & Benefits
- CASE Ingredients Features
- Product Features
- Low viscosity
- Good diluency
- Light color
- Improved flexibility
- Good cure response
- Improved adhesion on plastics, wood, and some metals
Applications & Uses
- Applicable Processes
- Coating End Applications
- Compatible Substrates & Surfaces
- Cure Method
- Ink & Toner End Applications
- Markets
- Applications
- Product Applications
- Wood coatings
- Coatings and inks for flexible and rigid plastics
Properties
- Physical Form
Packaging & Availability
- Packaging Type
Principal Information
- Group Principal Number
- S000001
- Principal
Storage & Handling
- Storage Conditions
- Care should be taken not to expose the product to high temperature conditions, direct sunlight, ignition sources, oxidizing agents, alkalis or acids.
- This might cause uncontrollable polymerization of the product with the generation of heat.
- Storage and handling should be in stainless steel, amber glass, amber polyethylene or baked phenolic lined containers.
- Procedures that remove or displace oxygen from the material should be avoided.
- Do not store this material under an oxygen free atmosphere.
- Dry air is recommended to displace material removed from the container.
- Wash thoroughly after handling. Keep container tightly closed.
- Use with adequate ventilation.
Other
- Appearance
- Clear
- Appearance (SDS)
- liquid clear clear liquid
- Color (SDS)
- clear pale yellow
- Flammability (SDS)
- Normal combustion
- Item Number
- Odor (SDS)
- Ester like characteristic
- Other Hazards
- Not applicable
- Protect from Freezing
- Yes
- Temperature Control
- Yes
- USA/DOT UN Number
- Not Applicable
- Chemical Properties
Value Units Test Method / Conditions Acid Value max. 0.4 mg KOH/g - Material Composition
Value Units Test Method / Conditions Residual Solvent Content max. 0.09 % - Optical Properties
Value Units Test Method / Conditions Color Scale max. 60.0 APHA - Physical Properties
Value Units Test Method / Conditions Density 1.06 g/mL at 25°C Flash Point min. 100.0 °C Setaflash Melting Point max. 0.0 °C Moisture Content max. 0.1 %(W/W) Molecular Weight 242.0 g/mol Storage Temperature 39.0-104.0 °F Vapor Pressure max. 0.03 mm Hg at 20°C Viscosity 5.0-15.0 mPa.s at 25°C - SDS Physical and Chemical Properties
Value Units Test Method / Conditions Autoignition Temperature (SDS) 240.0 °C Boiling Point (SDS) min. 200.0 °C Density (SDS) 1.06 g/cm³ Flash Point (SDS) min. 110.0 °C Cleveland Open Cup Log Partition Coefficient (Log Pow) (SDS) 2.28 - EC Method A8 at 30°C, n-octanol /water Log Partition Coefficient (Log Pow) (SDS) 2.28 - High Performance Liquid Chromatography (HPLC) at 30°C, n-Octanol/Water Melting Point (SDS) max. 0.0 °C Solubility In Water (SDS) 3.0-4.0 g/L at room temperature Vapor Density (SDS) 1.0 kg/m³ Vapor Pressure (SDS) max. 0.00085 hPa at 20°C Viscosity (SDS) 7.0-13.0 mPa.s at 25°C Volatile Content (SDS) max. 0.5 %(W/W) pH (SDS) 6.8-7.2 - - Shelf Life & Stability
Value Units Test Method / Conditions Shelf Life 0.0 d