EBECRYL® PEG200 DMA

Note: n = 4

EBECRYL® PEG200DMA is characterized by its:

• Non-toxic, non-sensitizing, non-irritant
• Low viscosity
• High purity dimethacrylate resin

EBECRYL® PEG200DMA is used in following applications:

• Co-monomer to improve mechanical performance and chemical resistance of acrylic polymers, unsaturated polyesters, polyolefins
• UV and thermally cured applications like anaerobic adhesives, sealants, flexographic printing plates, chemical anchoring

EBECRYL® PEG200DMA can be used as a co-agent to optimize curing, processability and mechanical properties of vulcanized rubbers. EBECRYL® PEG200DMA is furthermore used in composites as a stirene alternative and as a crosslinker to improve mechanical properties. Other applications include anaerobic adhesives, formulations for coatings, PVC co-agents and chemical fixing and anchoring.

The toxicological properties of this material have not been fully determined. Products of this type can be expected to be eye and skin irritant and have the potential to cause sensitization or other allergic responses. Appropriate precautions should be taken to avoid eye and skin contact and to avoid inhalation of the aerosols or vapors. Consult the relevant Safety Data Sheet for appropriate handling procedures and protective equipment prior to using this or any other material referred to in this bulletin.

Care should be taken not to expose radical curable products to temperatures exceeding 40°C for prolonged periods or to direct sunlight. This might cause uncontrollable polymerization of the product with generation of heat. Storage and handling should be in stainless steel, amber glass, amber polyethylene or baked phenolic lined containers. Do not store this material under an oxygen free atmosphere. Use dry air to displace material removed from the container. This material should not be stored for more than 2 years.