Kane Ace® FM-40

Kane Ace® FM-40 is extremely efficient and provides excellent impact strength to both simple and complex part designs. Kane Ace@ FM-40 is highly suited for outdoor and durable polyvinyl chloride (PVC) based products, such as window profiles, vinyl siding. vinyl fencing, deck, rail. and injection molded parts.

Extruded Parts and Injection Molded Parts - Kane Ace® FM-40 promotes the development of moderate gloss with high impact strength. Because of its high efficiency, there are minimal effects on part strength, stiffness characteristics, processing and dimensional stability.

All employees who handle these products should be trained to handle them safely. Keep container tightly closed when not in use. Store locked up. Store containers in a cool, dry location, away from direct sunlight, sources of intense heat, or where freezing is possible. Do not cause static spark; ground all equipment. Systems must be designed to safely handle and convey a material capable of causing a dust explosion. Do not store near high temperature, boilers, heaters, hot pipes, flames or oxidizing agents. Keep area ventilated. Since material can burn, consider limiting indoor storage to areas equipped with appropriate automatic sprinkler systems. Improper storage conditions may shorten safe storage time. Since these products may degrade over time, and in order to avoid possible self-ignition, it is recommended that unused material be properly disposed of 3 years after the manufacturing date. Material should be stored in secondary containers or in a diked area, as appropriate. Store containers away from incompatible chemicals . Post warning and "NO SMOKING" signs in storage and use areas, as appropriate. Inspect all incoming containers before storage to ensure containers are properly labeled and not damaged. Empty containers may contain residual material; therefore, empty containers should be handled with care.

Kane Ace® FM-40 is supplied in 50 lb polymeric bags and 1,000 lb bulk bags.