Enhanced TDS
Identification & Functionality
- Base Chemicals Functions
- Blend
- No
- Chemical Family
- Industrial Additives Functions
- Product Code
- MITM16262
- Single Ingredient
- Yes
- Technologies
- Product Families
Features & Benefits
Applications & Uses
- Applicable Processes
- Base Chemicals End Uses
- Industrial Additives End Use
- Markets
- Applications
Properties
- Physical Form
Safety & Health
- Safety Information
- Handle the material with care. Avoid contact with water and moisture.
- Reaction with water always results formation of Carbon dioxide and therefore increase of pressure in the closed storage container.
- Avoid contact with skin and eyes. Do not inhale the vapors of the product.
Principal Information
- Group Principal Number
- S002918
- Principal
Storage & Handling
- Storage Conditions
- ONGRONAT® 3600 preserves its quality stored between 25 and 50°C under a nitrogen blanket (dew point: - 40°C) for 6 months from the date of production.
- During storage below 25 °C the quality of ONGRONAT® 3600 may deteriorate.
- Product must not be stored above 50°C because its color can change and unwanted dimerisation may occur which leads to the decrease of the NCO content.
- The product must not come into contact with water. In order to prevent water (moisture) ingress, nitrogen is used usually (dew point of -40 °C) to displace the air from the drums or containers.
- It is not advised to use dry air as an inert blanket for the above purpose because due to contact with air or oxygen the color of the product may change to yellow due to the oxidation.
- Since carbon dioxide (CO₂) is soluble in isocyanates, it is not recommended to be used as an inert gas either.
Other
- Appearance
- Colorless or pale yellow transparent liquid
- Appearance (SDS)
- Colorless to light yellow liquid
- Color (SDS)
- Colorless to pale yellow
- Odor (SDS)
- Aromatic
- Other Hazards
- Hazards Not Otherwise Classified: Not applicable.
- TDG Canada Proper Shipping Name
- Not Applicable
- TDG Canada UN Number
- Not Applicable
- Temperature Control
- No
- USA/DOT Proper Shipping Name
- Not Applicable
- USA/DOT UN Number
- Not Applicable
- Chemical Properties
Value Units Test Method / Conditions Acid Value max. 50.0 ppm Internal Method - Material Composition
Value Units Test Method / Conditions Isocyanate Group Content min. 33.4 %(W/W) ASTM D5155 - Physical Properties
Value Units Test Method / Conditions Density 1.2 g/cm³ at 25°C Flash Point min. 200.0 °C Melting Point max. 20.0 °C Viscosity 13.0-15.0 mPa.s at 25°C - SDS Physical and Chemical Properties
Value Units Test Method / Conditions Autoignition Temperature (SDS) min. 601.0 °C Decomposition Temperature (SDS) 354.0 °C Density (SDS) 1.2 g/cm³ at 20°C Flash Point (SDS) 208.5 °C Initial Boiling Point (SDS) min. 300.0 °C Log Partition Coefficient (Log Pow) (SDS) 4.51 - OECD 117 Log Partition Coefficient (Log Pow) (SDS) 4.51 - OECD 117 at 22°C Melting Point (SDS) 9.3-10.7 °C Solubility In Water (SDS) 0.0068 g/L at 25°C Vapor Pressure (SDS) 0.00062-0.0014 Pa at 20°C Viscosity (SDS) 13.0-15.0 mPa.s at 23°C, log Pow - Shelf Life & Stability
Value Units Test Method / Conditions Shelf Life 6.0 mo