Enhanced TDS
Identification & Functionality
- Blend
- No
- CASE Ingredients Functions
- Chemical Family
- Chemical Name
- Product Code
- MITM16836
- Single Ingredient
- Yes
- Technologies
- Product Families
Features & Benefits
Applications & Uses
- Base Chemicals End Uses
- Coating End Applications
- Compatible Polymers & Resins
- Compatible Substrates & Surfaces
- Markets
- Applications
- Product Application
- WANNATE® HT-100plus (1,6-hexamethylene diisocyanate based polyisocyanate)is a solvent free aliphatic polyisocyanate based on hexamethylene diisocyanate (HDI), colorless to slightly yellowish clear liquid.
- WANNATE® HT-100plus can be used as the hardener component for lightfasttwo- component polyurethane coatings with high resistance to chemicals andweathering, very good gloss retention and outstanding mechanical properties. Preferred co-reactants are polyacrylates or polyester polyols.
- The main applications for coatings based on WANNATE® HT-100plus are automotive refinishing, transportation, industrial finishing and plastics.
- WANNATE® HT-100plus can be mixed with the following products: aliphatic polyisocyanates, polyester polyols, aromatic polyisocyanates and polyacrylates.
Properties
- Physical Form
Principal Information
- Group Principal Number
- S002918
- Principal
Storage & Handling
- Storage Information
- Storage in original container. Protect from moisture, heat and foreign material. WANNATE® HT-100plus is sensitive to moisture. Storage at higher temperaturesmay result in increasing of color and viscosity.
- WANNATE® HT-100plus can be thinned with esters , ketones and aromatic hydrocarbons such as ethyl acetate , butyl acetate , methoxypropylacetate , acetone , methyl ethyl ketone, methyl isobutyl ketone, cyclohexanone, toluene, xylene, solvent naphtha 100 and mixtures thereof. Generally speaking, it has good compatibility with the solvents listed . However , the solutions formed must be tested for their storage stability. Only PU grade solvents should be used (max.0.05% water, absence ofreactive groups such as hydroxyl or amino groups). Aliphatic hydrocarbons areunsuitable as solvents.
- WANNATE® HT-100plus is not recommended to be thinned below 40% solid content. Prolonged storage of a solution with a lower content may result in turbidity or sedimentation, even gelation.
- WANNATE® HT-100plus is sensitive to moisture and must be stored in tightly sealed container. It can be stored for at least 15 months at temperatures between 0 and 30°C.
Other
- Appearance (SDS)
- Light yellow liquid
- Color (SDS)
- Light yellow
- Immiscible In (SDS)
- Water
- Item Number
- Odor (SDS)
- Odourless
- Other Hazards
- None Known
- Protect from Freezing
- No
- Temperature Control
- No
- USA/DOT UN Number
- Not Applicable
- Chemical Properties
Value Units Test Method / Conditions Equivalent Weight approx. 193.0 g/eq - Material Composition
Value Units Test Method / Conditions Hexamethylene Diisocyanate Content max. 0.1 % Isocyanate Group Content 21.7-22.2 % - Optical Properties
Value Units Test Method / Conditions Chromatic Number max. 40.0 - APHA - Physical Properties
Value Units Test Method / Conditions Density approx. 1.16 g/cm³ Viscosity 1750.0-3250.0 mPa.s at 25°C - SDS Physical and Chemical Properties
Value Units Test Method / Conditions Autoignition Temperature (SDS) 460.0 °C Decomposition Temperature (SDS) 250.0 °C Flammability Limits (SDS) 0.9-9.5 %(V/V) Flash Point (SDS) 228.0 °C Freeze Point (SDS) -24.0 °C Kinematic Viscosity (SDS) 1800.0-3200.0 cSt at 25°C Partition coefficient n-octanol/water (SDS) 9.81 - Relative Density (SDS) 1.16 - Water = 1 - Shelf Life & Stability
Value Units Test Method / Conditions Shelf Life 15.0 mo