Products

PARALOID™ A-21 100% Resin imparts excellent intercoat adhesion, hardness, and outdoor durability. It has the same composition and characteristics as the solution grade, while providing wider formulating latitude.

FORTEGRA® 401 is a specialty polyoxypropylene diamine modified liquid epoxy resin. FORTEGRA® 401 is designed for the use of enhancing the toughness and flexibility for epoxy systems, mainly used in epoxy adhesives and coatings products. With improved toughness and flexibility, the adhesives products can achieve better drop resistance and impact peeling resistance, as well as perform well on aging tests. While for the applications in coatings, it brings the benefits of improved adhesion and impact resistance. A wide variety of curing agents are available to cure this resin at ambient conditions. Most frequently used curing agents are aliphatic polyamines, polyamides and modified versions of these. Elevated temperature cure is necessary and post-cure required to develop full end properties if anhydride or catalytic curing agents are employed.

KRONOS® 2310 has outstanding optical properties and very high weather resistance in coatings.

Exolit® OP 1230 is a white, fine grained powder based on an organic phosphinate. The product is non-hygroscopic and it is insoluble in water and organic solvents. Exolit® OP flame retardants for polyamides are all based on aluminum diethyl-phosphinate (= DEPAL). The pure substance DEPAL is sold as Exolit OP 1230 and in combination with synergists as Exolit® OP 13xx types. Exolit® OP 1230 is the first non-halogenated flame retardant which can withstand the demanding requirements of this high end segment of engineering plastics.

CARPOL® EDAP-770 is an ethylenediamine-initiated polyether polyol. The resulting material has a nominal functionality of four and a typical hydroxyl number of 770. This tetrol is polymerized solely with propylene oxide and is autocatalytic due to its amine content. This polyol’s functionality makes it optimal for use in rigid foams as a crosslinking modifier. In addition, CARPOL® EDAP-770 can also be used as a curative for most C.A.S.E. applications.

CARPOL® SPA-530 is a sucrose amine-initiated polyether polyol. The high functionality of the initiators yields a resultant polyol with a nominal functionality of 5.5 and a typical hydroxyl number of 530. This polyol’s functionality and short-chained nature make it optimal for use in rigid foam. In addition, CARPOL® SPA-530 contains amine and therefore is autocatalytic. This allows the formulator to use less catalyst while achieving the same reactivity seen in other neutral rigid polyols.

D.E.R.® 383 liquid epoxy resin is a reaction product of epichlorohydrin and Bisphenol A.

Paricin® 220 is N-(2-hydroxyethyl)-12-hydroxy- stearamide. It is a high melting point wax like material that has broad compatibility with natural and synthetic waxes, resins and polymers to provide excellent slip and lubricating properties.

HYDROGRAL® P is a pentaerythritol ester of partially hydrogenated rosin. It is specially recommended to improve oxidation resistance and long term adhesive performances of pressure sensitive adhesives.

CARPOL® GP-5171-60 Polyol is a glycerin-initiated polyether polyol. The resulting material has a nominal functionality of three and an average molecular weight of 5000 Da. This triol is polymerized with propylene oxide and then capped with 71% ethylene oxide. The outcome is a polyol with enhanced reactivity. Main applications include flexible foam, however, CARPOL® GP-5171-60 Polyol may also be included as a component in other urethane products and applications.

Exolit® OP 930 is a white, fine-grained powder based on an organic phosphinate. The product is not hygroscopic and it is insoluble in water and common organic solvents lik cetone, dichloromethane, MEK, toluene. Exolit® OP 930 can easily be dispersed in solvents like acetone or MEK.

Licocene® PP MA 6452 granules are used in metal casting and hot melt adhesives. They offer excellent adhesion, good compatibility, heat resistance, improved cohesion, and anti-slip properties. It functions as an adhesion promoter, coupling agent, and release agent in industrial additives.

Exolit® RP 6520 is a brown-red paste, and is a thixotropic blend of castor oil with stabilised, microencapsulated red phosphorus. The paste form allows safe and simple handling and thus processing is made easier. The thixotropic nature of this concentrate hinders the sedimentation process and simplifies the re-homogenisation after long storage periods.

Europrene® SOL TH 2315 is a linear block copolymer obtained by selective hydrogenation of styrene - butadiene-styrene block copolymers. The polymer is based on styrene and ethylene/butylene, where bound styrene content is 32%wt. A non-staining, TNPP free antioxidant system is added during the production process.

Licocene® PP 1302 fine grain is a propylene-Ethylene-Copolymer Wax.