Products

H.B. Fuller® PD-0431 is a carboxylated, surfactant stabilized acrylic emulsion polymer.

ROBOND™ PS-90AF Adhesive is a permanent pressure-sensitive adhesive which is characterized by a balance of moderate shear strength and tack. This adhesive has demonstrated excellent performance in both carton sealing tape and overlaminate applications. The viscosity and excellent stability allows it to be used with a variety of coating methods. It is coater-ready product and may be direct coated to a variety of facestocks.

DERCOLYTE® TS 125, is produced from the polymerization of terpene and styrene. It is a light colored tackifying resin recommended to improve the viscoelastic properties of silica filled tire tread compounds. It is also showing excellent adhesive performances with block copolymers.

RHOPLEX® R-253 is designed for use as an aqueous release coating, particularly for masking tapes. Coated directly over creped or flat saturated tape stocks or base coated saturated tape stock, RHOPLEX® R-253 offers a release surface for a typical masking tape adhesive. These release properties are retained over extended storage periods as indicated by accelerated high temperature/high humidity aging tests.

DERTOPHENE® T 115 is a light-colored and low VOC terpene phenolic resin. It is compatible with various polymers and suitable for solvent based, hot melt adhesives.

Europrene® SOL TH 2312 is a linear block copolymer obtained by selective hydrogenation of styrene - butadiene-styrene block copolymers. The polymer is based on styrene and ethylene/butylene, where bound styrene content is 30%wt. A non-staining, TNPP free antioxidant system is added during the production process.

Foral® 105 resin is the pentaerythritol ester of highly hydrogenated gum rosin. A pale thermoplastic resin, it offers advantages as a tackifier or modifier in various adhesive and coating compositions. Foral® 105 resin exhibits outstanding resistance to oxidation and to discoloration caused by heat and ageing. It has a substantially higher softening point than glycerol rosin esters, and is therefore recommended where a harder resin may be desirable.

DERTOPHENE® T is a light-colored and low VOC terpene phenolic resin compatible with acrylics, various elastomers and waxs. It allows to improve the performance of hot melt and solvent based adhesives such as specific adhesion and tack.

Europrene® SOL T 6320 is a linear block copolymer obtained by anionic polymerisation. The polymer is based on styrene and butadiene, where bound styrene is 31 % wt and diblock content is 75 %. A non staining antioxidant system is added during the production process.

Europrene® SOL T 190 is a linear block copolymer obtained by anionic polymerisation. The polymer is based on styrene and isoprene, where bound styrene content is 16 % wt and diblock content is 25 %. A non staining, TNPP free antioxidant system is added during the production process.

Europrene® K SOL 1205 is a solution styrene butadiene partial block copolymer, polymerized using an alkyl lithium catalyst at the Yeosu production facility in Korea. A non staining, BHT and TNPP free antioxidant system is added during the production process.

Europrene® SOL T 9113 is a linear block copolymer obtained by anionic polymerisation. The polymer is based on styrene and isoprene, where bound styrene content is 18 % wt and diblock content is 8 %. A non-staining, TNPP free antioxidant system is added during the production process.

Europrene® SOL TH 2311 is a linear block copolymer obtained by selective hydrogenation of styrene - butadiene-styrene block copolymers. The polymer is based on styrene and ethylene/butylene, where bound styrene content is 30%wt. A non-staining, TNPP free antioxidant system is added during the production process.

Europrene® SOL T 9133 is a linear block copolymer obtained by anionic polymerisation. The polymer is based on styrene and isoprene, where bound styrene content is 16 % wt and diblock content is 55 %. A non-staining, TNPP free antioxidant system is added during the production process.

DERTOPHENE® T 105 is a light-colored and low VOC terpene phenolic resin. It allows to improve the properties of hot melt or solvent based adhesives such as specific adhesion, hot tack or flexibility.