Products

CRAYVALLAC® 60X is used in epoxies (EP) and vinyls. It is applied in anti-fouling coatings, chlorinated rubber coatings, primers, and solventborne coatings. The product provides anticaking, recoatability, and sag resistance.

EBECRYL® 170 is an acidic acrylate adhesion promoter designed as an additive for ultraviolet (UV) and electron beam (EB) curable coatings on metal.

RHOPLEX® PR-33 is an aqueous, all-acrylic, binder designed for exterior and interior primers and stain blocking sealers. This binder uses ambient cross linking technology to offer improved primer performance versus conventional latex polymers. The combination of an all-acrylic backbone and ambient cure crosslinking technology contribute to the excellent balance of properties found with RHOPLEX® PR-33 Emulsion Polymer. The excellent film formation achieved blocks stains from migrating through the dry paint film and yields stain blocking performance at high PVC. Enhanced adhesion and excellent durability are additional attributes of this technology.

DOP is still widely used as a plasticizer in selected applications where volatiles are less of an issue. It is also used as a hydraulic fluid and as a dielectric fluid in capacitors. DOP was the most widely used material as a plasticizer in manufacturing of articles made of PVC. Due to toxicity reasons, its usage has dropped and has been replaced by lower volatile phthalate and phthalate free products in some PVC and other applications.

D.E.R.® 667-20 is a high molecular weight "7-type" epoxy resin.

D.E.H.® 546 curing agent is a low viscosity modified cycloaliphatic amine intended for ambient temperature curing of liquid epoxy resins.

Corrosperse™ 177 MA is a 75% dispersion of Strontium Chromate in MAK and Acetone. It has a Fineness of Grind (7 Hegman) which means no grinding is required and it can easily be incorporated using high speed mixing techniques. Because the product is a pourable liquid, there are none of the concerns associated with Hexavalent Chrome in pigment form, specifically exposure to dust.

BS-1C-FF is an economy organoclay designed for use primarily in low to medium polarity solvent systems. It is a conventional technology type, entailing activation to achieve optimal performance.

CYMEL® UB-30-B resin is a n-butylated urea crosslinker supplied in n-butanol. Its fast film hardness development combined with excellent adhesion properties makes CYMEL® UB-30-B resin suitable for a wide range of industrial baking applications.

D.E.H.® 534 cycloaliphatic amine hardener is used as a curing agent for epoxy resins for rapid set and low temperature cure systems with high gloss and strength. It imparts very rapid development of properties and results in a blush-free product with good water spot resistance and very good chemical resistance. It can also be used as an accelerator for other hardeners in coatings and civil engineering applications.

DLVE™ 52 is a low viscosity epoxy resin that facilitates high solids coating formulations with low volatile organic compound (VOC) emissions, while minimizing compromises in performance. DLVE™ 52 be cured using multiple types of curing agents.

Polycin® M-365 is a solventless, castor oil-based derivative designed for use as a polyol or viscosity modifier in polyurethane coating systems. Polycin® M-3655 will impart higher hardness and strength, and as a reactive diluent, Polycin® M-365 provides VOC reduction along with the beneficial properties of castor oil derivatives, such as improved hydrophobicity, flow, and leveling.

D.E.H.® 545 hardener is a low viscosity formulated polyamidoamine adduct specially designed for wet application areas. It may be formulated with liquid Bisphenol A and/or Bisphenol F epoxy resins for optimum adhesion on dry and wet concrete substrates. D.E.R.® 353 and D.E.R.® 324 are recommended epoxy resins for use with D.E.H.® 545 as a starting formulation of primer systems.

PARALOID™ AU-608X Resin are acrylic polyols specifically designed to produce hard, resistant, durable coatings when reacted with aliphatic isocyanates. The exceptional properties of these coatings have led to increased use in such heavy duty maintenance applications as chemical plant storage tanks and offshore rigs and platforms.