Products

D.E.H.® 545 hardener is a low viscosity formulated polyamidoamine adduct specially designed for wet application areas. It may be formulated with liquid Bisphenol A and/or Bisphenol F epoxy resins for optimum adhesion on dry and wet concrete substrates. D.E.R.® 353 and D.E.R.® 324 are recommended epoxy resins for use with D.E.H.® 545 as a starting formulation of primer systems.

PARALOID™ AU-608X Resin are acrylic polyols specifically designed to produce hard, resistant, durable coatings when reacted with aliphatic isocyanates. The exceptional properties of these coatings have led to increased use in such heavy duty maintenance applications as chemical plant storage tanks and offshore rigs and platforms.

Polycin® D-140 is a 100% solids, castor oil-based derivative designed for use as a polyol or reactive diluent in polyurethane systems. Polycin D-140, with its very low viscosity and secondary hydroxyl groups, will allow for the formulation of higher system solids with improved VOC reduction and longer pot-life. Polycin® D-140 will also impart the beneficial properties of castor oil derivatives, such as improved flow and levelling.

Hybricor™ 204S is a pigment grade hybrid corrosion inhibitor, effective in primer applications intended for cast and structural aluminum protection. It can easily be incorporated into the coating using a high speed disperser. Hybricor™ 204S has a particle size of 7 Hegman which permits its use in both primer and DTM applications.

D.E.R.® 3212 liquid epoxy resin is a reactive product of epichlorohydrin and bisphenol a modified with and aromatic mono-functional reactive diluent.

HP0145 - Water-Reducible Alkyd is a water-reducible short oil chain stopped alkyd dissolved in Glycol Ether EB and 2-Butanol (50/50). Based on Tall Oil Fatty Acids, this product may be reduced with water after appropriate neutralization with materials such as ammonia, triethylamine or DMEA. Baking enamel formulations can also be produced by adding appropriate amino resins.

PARALOID™ AU-608B are acrylic polyols specifically designed to produce hard, resistant, durable coatings when reacted with aliphatic isocyanates. The exceptional properties of these coatings have led to increased use in such heavy duty maintenance applications as chemical plant storage tanks and offshore rigs and platforms.

K-FLEX® 500P is a blend of diethylene glycol dibenzoate and dipropylene glycol dibenzoate that was created to lower the VOC content of a coating more than other K-FLEX® 500P plasticizers. It was specifically designed for the coatings industry where very low VOC content is required or other application areas where low VOC content is critical.

CRAYVALLAC® 60X is used in epoxies (EP) and vinyls. It is applied in anti-fouling coatings, chlorinated rubber coatings, primers, and solventborne coatings. The product provides anticaking, recoatability, and sag resistance.

EBECRYL® 170 is an acidic acrylate adhesion promoter designed as an additive for ultraviolet (UV) and electron beam (EB) curable coatings on metal.

EBECRYL® 4381 is a unsaturated polyester diluted with 30% dipropyleneglycol diacrylate (DPGDA)(1). Coatings based on EBECRYL® 4381 are characterized by good hardness and high gloss

Vorite® 125 has been polymerized by a unique process, which imparts excellent thermal and viscosity stability. The Vorite® oils are polymeric plasticizers for cellulosics and elastomers in adhesives, sealants, gasket cements and belt dressings. They aid in plasticizing the reactants (polyol) for flexible urethane foams and elastomers. Other uses include lacquers, marking inks and plug valve lubricants.

RHOPLEX® PR-33 is an aqueous, all-acrylic, binder designed for exterior and interior primers and stain blocking sealers. This binder uses ambient cross linking technology to offer improved primer performance versus conventional latex polymers. The combination of an all-acrylic backbone and ambient cure crosslinking technology contribute to the excellent balance of properties found with RHOPLEX® PR-33 Emulsion Polymer. The excellent film formation achieved blocks stains from migrating through the dry paint film and yields stain blocking performance at high PVC. Enhanced adhesion and excellent durability are additional attributes of this technology.

DOP is still widely used as a plasticizer in selected applications where volatiles are less of an issue. It is also used as a hydraulic fluid and as a dielectric fluid in capacitors. DOP was the most widely used material as a plasticizer in manufacturing of articles made of PVC. Due to toxicity reasons, its usage has dropped and has been replaced by lower volatile phthalate and phthalate free products in some PVC and other applications.

D.E.R.® 667-20 is a high molecular weight "7-type" epoxy resin.