Products

NANOCRYL® C 140 shows the highest performance in scratch and abrasion resistance without influencing gloss or transparency of the cured UV-coating.

NANOCRYL® C 150 shows the highest performance in scratch and abrasion resistance without influencing gloss or transparency of the cured UV-coating.

Dynasylan® F 8263 acts as a surface modifier on oxidic, carboxy- and hydroxyfunctional substrates (e.g. glass, ceramic). Dynasylan® F 8263 is a colorless liquid. It can be diluted in alcohols and various other organic solvents, e.g. n-hexane, xylol, acetone or ethyl acetate.

Toyal TCR3010 is a special circulation resistant, non-leafing aluminum paste.

SURFYNOL® 61 surfactant is a 100% active multifunctional surface active agent. Due to its volatile nature, SURFYNOL® 61 surfactant can evaporate from a system under use conditions and/or heating. Therefore, SURFYNOL® 61 surfactant is useful in applications where residual surface activity or contamination is undesirable, such as silicon wafer and glass cleaning. SURFYNOL® 61 surfactant can provide excellent wetting of polyethylene and polypropylene films. Upon evaporation, little to no surfactant remains to interfere with trapping or cause water sensitivity in printing inks. During the curing of silicones by the silane/alkene addition reaction, SURFYNOL® 61 surfactant can “block” platinum catalysts through complexation; this effect can be used to delay the curing reaction. However, the SURFYNOL® 61 surfactant typically flashes off upon heating to liberate the active catalyst and trigger the reaction.

ELVACE® 40705-00 is used in packaging adhesives and waterborne adhesives. It features excellent adhesion, good hydrolysis resistance, good toughness, increased viscosity, and short bond development time. The product has low grit content and resists plasticizer migration but has poor borax tolerance. It functions as a binder and resin in CASE ingredients and as a resin in plastics and elastomers.

ELVACE® 757 is a surfactant stabilized vinyl acetate-ethylene copolymer emulsion.

D.E.H.® 80 is a phenolic hardener based on an unmodified solid reaction product of liquid epoxy resin and bisphenol A containing a polyacrylate flow modifier and about 0.7% of a curing accelerator.

Toyal TCR3140 is a non-leafing aluminum paste used in fully circulation resistant.

AEROSIL® E 972 is a fumed silica after-treated with DDS (dimethyldichlorosilane). It is an efficient rheology modifier suitable for a wide range of applications and is very easy to disperse.

EBECRYL® 4513 is an aliphatic urethane acrylate supplied for use in formulations of ultraviolet (UV) and electron beam (EB) energy curable coatings. EBECRYL® 4513 exhibits elastic properties making it suitable for use flexible substrates. Coatings formulated with EBECRYL® 4513 also demonstrate high chemical and wear resistance and are highly resistant to yellowing.

EBECRYL® 8804 is an aliphatic urethane diacrylate that is a high viscosity liquid at room temperature and is light in color. Films of EBECRYL® 8804 cured by ultraviolet light (UV) or electron beam (EB) exhibit excellent abrasion resistance, toughness and flexibility, and are resistant to yellowing.

Toyal TSB2044A is used in paints and coatings markets and functions as a pigment. It features circulation stability and non-leafing properties.

ELVACE® 739 is a vinyl acetate-ethylene copolymer emulsion.

ELVACE® 735 is a low VOC product used in packaging adhesives and waterborne adhesives. It functions as a binder and resin in CASE ingredients and as a resin in plastics and elastomers.