Products

CRAYVALLAC® EXTRA is a high performance, micronised amide wax rheology modifier suitable for high-solids and solvent-free applications with very high robustness. It is especially recommended in 2K epoxy primers for its high temperature tolerance.CRAYVALLAC® EXTRA overcomes those difficulties which exist with hydrogenated castor oil based rheology modifiers e.g. seeding and false-body and that were maximised when activation was performed at high temperatures.

ORGASOL® 2002 ES4 NAT 3 is a spheroldal powder of polyamide 12, with 4 as average diameter and a narrow particle size distribution. An extremely high level of quality is achieved thanks to our rigorous control of particle size distribution, providing xcellent coneletency in parformancs.

CRAYVALLAC® PC is a micronised hydrogenated castor oil derivative surface enhancing additive for powder coatings based on PRIMID, hybrid and TGIC technologies. CRAYVALLAC® PC is easily incorporated using conventional pre-mixing techniques prior to extrusion. The use of CRAYVALLAC® PC leads to a substantial improvement in the appearance of the final cured powder coating. This improvement is due to CRAYVALLAC® PC enhancing the flow, levelling and degassing processes during cure. This is the result of CRAYVALLAC® PC greatly reducing the melt viscosity during this critical levelling stage in the cure cycle. This viscosity reduction also enhances the performance of other additives such as acrylic levelling agents and the degassing agent benzoin. CRAYVALLAC® PC works well in both clear and pigmented powder coating systems based on PRIMID, Hybrid and TGIC technologies.

AP 1227 is a low viscosity, modified aliphatic amine adduct hardener for epoxy resins based lacquers coatings.

ACRYSOL™ TT-935 Rheology Modifier is a hydrophobically modified, alkali-soluble, anionic associative thickener, designed to give medium shear rate viscosity in interior/exterior flat latex paints. ACRYSOL™ TT-935 Rheology Modifier can be used as either a primary or co-thickener in water based coatings. ACRYSOL™ TT-935 Rheology Modifier offers the formulation of paints with excellent resistance to roller spattering with better film build and leveling than conventional thickeners. Paints formulated with ACRYSOL™ TT-935 Rheology Modifier as a sole thickener exhibit improved flow and leveling over that of medium to high molecular weight cellulosic thickeners. The rheology of ACRYSOL™ TT-935 Rheology Modifier can be modified to give further improvements in flow and leveling by addition of low levels of surfactant or glycol ether type co-solvents to reduce the low shear viscosity. Addition of some pre-dispersed colorant may also have this effect. ACRYSOL™ TT-935 Rheology Modifier is recommended for use in interior paints requiring improved flow and leveling, and lower raw material cost compared to cellulosic thickeners. Where superior water resistance is required we would recommend the use of ACRYSOL™ SCT-275 Rheology Modifier. ACRYSOL™ TT-935 Rheology Modifier can be used in exterior paints but we suggest formulators exercise caution to minimize potential blistering which can occur due to the anionic nature of this product. Delivered as a low viscosity liquid, ACRYSOL™ TT-935 Rheology Modifier is very easy to handle and incorporate into the paint. It is resistant to microbiological degradation, thereby avoiding viscosity loss in the paint, a common problem encountered by paint manufacturers.

ACRYSOL™ RM-725 Rheology Modifier is a solvent-free, hydrophobically modified ethylene oxide urethane (HEUR) based on proprietary technology for an excellent balance of properties. ACRYSOL™ RM-725 Rheology Modifier is designed as a universal, efficient mid shear viscosity builder with all binder types that are used for interior wall paints as well as exterior systems for wood, trim stains and masonry. This KU-building associative thickener offers formulators an excellent balance of sag resistance and leveling, including PVA and VAE binder based paints. ACRYSOL™ RM-725 Rheology Modifier also contributes significant to high shear viscosity, allowing the reduction of ICI builder use level in the paint.

TEGO® Rad 2200 N is a radically cross-linkable slip and substrate wetting additive combining utmost compatibility and strong slip. Recommended for systems requiring leveling and improvement of flow.

AP 5726 is a modified cycloaliphatic amine adduct hardener for epoxy resin based lacquers and coatings.

ORGASOL® 2002 D NAT 1 is a spheroïdal powder of polyamide 12, with 20 um as average diameter and a narrow particle size distribution. An extremely high level of quality is achieved thanks to our rigorous control of particle size distribution, providing excellent consistency in performance.

AP 5910 is a low viscosity, modified aliphatic amine hardener for epoxy resins based lacquers coatings.

ORGASOL® 1002 D NAT 1 is an ultrafine powder of polyamide 6 with a narrow particle size distribution and nearly round particle shape.

ORGASOL® 2001 UD NAT 2 is an ultrafine powder of polyamide 12, with a narrow article size distribution and nearly round particle shape.

AP 5905 is a low viscosity, modified Cycloaliphatic amine adduct hardener for epoxy resin based lacquers and coatings.

RHOPLEX® SG-10C is a versatile 100% copolymer that was designed for use in high-quality interior/exterior semigloss paints. RHOPLEX® SG-10C provides paint formulators with an opportunity to achieve excellent early and ultimate block resistance, and very good flow and leveling. This product establishes a new level of performance for aqueous applications. RHOPLEX® SG-10C is an APEO (alkyl phenol ethoxylate) surfactant free1 binder and contains no intentionally added PFAS.