Products

D.E.R.® 353 liquid epoxy resin is a mono-functional reactive diluent modified liquid epoxy resin.

VANCRYL® 926 is a very low glass transition temperature acrylic polymer for film printing applications in the graphic arts industry. Inks made from this polymer exhibit excellent gloss, adhesion to polyolefins, ice water crinkle resistance, and fine printing characteristics. These properties are needed when converting packaging printing from solvent-based formulations to water-based formulations. VANCRYL® 926 emulsion is compatible with VANCRYL® 926 pigment dispersions as well as other commonly used dispersion resins. It also exhibits excellent compatibility with additives such as surfactants, adhesion promoters, and waxes. VANCRYL® 926 can be used as the backbone of printing inks and overprint coatings where various COF or slide angle requirements are needed, from a range of 0.25 to 0.45.

TEGO® DISPers 651 is a waterborne wetting and dispersing additive specifically used for the production of universal colorants for decorative coatings. Wets and stabilizes inorganic and organic pigments. Can be used for a whole colorant line. Anionic and solvent-free.

SURFYNOL® SE-F is a self-emulsified surfactant that combines excellent wetting properties with good foam control and ease of incorporation in water borne coatings and inks.

TEGO® Rad 2250 (Germany) is a broadly usable radically cross-linkable slip agent for clear coats. It provides efficient wetting, slip, and flow combined with very good compatibility.

SURFYNOL® 485 W is a low-viscosity substrate wetting agent for water borne coatings and inks with high solubility in aqueous systems. SURFYNOL® 485 W can also be used for its stabilization and emulsification properties

DYNOL™ 607 provides extremely low dynamic and static surface tension with low to moderate foam. It is suitable for waterborne coatings and inks. DYNOL™ 607 improves solubility in a variety of demanding waterborne applications.

EBECRYL® 3730-TP20 is the modified diacrylate ester of a bisphenol A based epoxy resin diluted 20% by weight with the reactive diluent tripropylene glycol diacrylate (TPGDA). It is designed primarily for use in ultraviolet light (UV) or electron beam (EB) curable formulations. EBECRYL® 3730-TP20 is light in color with high UV/EB reactivity, and exhibits good wetting of pigments, matting agents and substrates compared to unmodified epoxy acrylates. Cured films based on EBECRYL® 3730-TP20 will typically demonstrate high gloss and hardness, and good chemical resistance.

SURFYNOL® MD-20 is a very compatible molecular defoamer based on Gemini surfactant technology. Freeof siliconeand silica. Offers additional dynamic wetting properties.

SURFYNOL® 61 surfactant is a 100% active multifunctional surface active agent. Due to its volatile nature, SURFYNOL® 61 surfactant can evaporate from a system under use conditions and/or heating. Therefore, SURFYNOL® 61 surfactant is useful in applications where residual surface activity or contamination is undesirable, such as silicon wafer and glass cleaning. SURFYNOL® 61 surfactant can provide excellent wetting of polyethylene and polypropylene films. Upon evaporation, little to no surfactant remains to interfere with trapping or cause water sensitivity in printing inks. During the curing of silicones by the silane/alkene addition reaction, SURFYNOL® 61 surfactant can “block” platinum catalysts through complexation; this effect can be used to delay the curing reaction. However, the SURFYNOL® 61 surfactant typically flashes off upon heating to liberate the active catalyst and trigger the reaction.

VANCRYL® 960 is a very low glass transition temperature acrylic polymer for film printing applications in the graphic arts industry. Inks made from this polymer exhibit excellent gloss, adhesion to polyolefins, ice water crinkle resistance, and fine printing characteristics. These properties are needed when converting packaging printing from solvent-based formulations to water-based formulations. VANCRYL® 960 is compatible with VANCRYL® 68 pigment dispersions as well as other commonly used dispersion resins. It also exhibits excellent compatibility with additives such as surfactants, adhesion promoters, and waxes. VANCRYL® 960 can be used as the backbone of printing inks and overprint coatings where various COF or slide angle requirements are needed, from a range of 0.25 to 0.45.

VANCRYL® 965 emulsion is a very low glass transition temperature acrylic polymer designed for film printing applications in the graphic arts industry. Inks made from this polymer exhibit excellent gloss, adhesion to polyolefins, ice water crinkle resistance, and fine printing characteristics. VANCRYL® 965 also has the unusual combined properties of excellent resolubility and fast drying. These properties are needed when converting flexible packaging printing from solvent-based to water-based formulations. VANCRYL® 965 emulsion is compatible with VANCRYL® 68 pigment dispersions as well as other commonly used pigment dispersions. It also exhibits excellent compatibility with additives such as surfactants, adhesion promoters, alcohols, and waxes. VANCRYL® 965 can be used as the backbone of printing inks and overprint coatings where various COF or slide resistance requirements are needed, from a range of 0.25 to 0.45.

SURFYNOL® PSA-336 provides excellent dynamic wetting on difficult- to-wet substrates. This wetting agent is very easy to formulate into water-based systems.

Caspol™ 5001 is a 100% solids castor oil based reactive diluent with a linear chain backbone having low viscosity, good compatibility and wetting. This polyol is the lowest molecular weight diol of the Caspol series. Caspol™ 5001 has a very low viscosity and produces higher strength, elongation and flexibility than DBTM Oil.

TEGO® DISPers 690 is a polymeric highly efficient wetting and dispersing additive for solvent borne formulations. Especially suitable for solvent borne flexo inks, even NC-free inks. Wets and stabilizes organic pigments and carbon blacks.