Products

AP 5500 is a low viscosity, reactive poly-amido amine hardener for epoxy resins based lacquers and coatings.

HP1152 - Soya Oil Alkyd is a low viscosity soya alkyd. It is formulated for use in ink vehicles and coatings that require improved pigment wetting. HP1152 - Soya Oil Alkyd can be used to improve the flow and reduce the viscosity of varnishes and inks, while minimising the need for solvents or ink oils. It can also be used to fortify latex paint, and increase the non-volatile content of conventional alkyd paints to improve their VOC compliance.

AP 5651 is a low viscosity, modified aliphatic amine adduct hardener for epoxy resins based lacquers coatings.

WC-20645S40 provides liquid colorants that are low in viscosity, high in color strength, and maintain excellent stability. Possible applications for the WC line include, but are not limited to, industrial, decorative, and architectural coatings, paper products, textile inks, and aggregate coatings.

ACS578285 Quin Red is a pigment compatible with concrete and wood substrates. It is used in aerosol coatings and graphic film applications. The product features excellent stability, high color strength, and low viscosity.

WC-20640S30 Quinophthalone Yellow is a liquid colorants that are low in viscosity, high in color strength, and maintain excellent stability. Possible applications for the WC line include but are not limited to industrial, decorative and architectural coatings, paper products, textile inks, and aggregate coatings.

ELVACE® 40713 functions as a binder and resin in CASE ingredients and as a resin in plastics and elastomers. It is used in adhesive and sealant applications.

WWT781290 Red Oxide YS is a pigment used in adhesives and sealants, and architectural coatings. It is compatible with concrete substrates.

RP 9310 Talc is produced from high purity blended ores, which provide an excellent balance of color and mechanical properties, for primary use in commodity polypropylene, polyester compounds and Coatings. RP 9310 Talc is designed to provide a low viscosity and low oil absorption. RP 9310 Talc is inert and will improve the many features in your formulations including reduced sag, spray ability and weathering. RP 9310 Talc is platy, hydrophobic and non-abrasive and will work will in plastics and coating applications.

D.E.R.® 3532 epoxy resin is a low viscosity, bisphenol a/f epoxy resin, modified with a monofunctional reactive diluent.

AP 5978 is a modified aliphatic amine hardener for epoxy resin to impart high strength and modulus.

Dynasylan® SILBOND® 40 is a clear, low-viscosity liquid with a minimum silica content of 40.0% (the Si content of Dynasylan® SILBOND® 40 is calculated as SiO2). Dynasylan® SILBOND® 40 is an ethyl polysilicate that is the partially hydrolyzed product of tetraethyl orthosilicate (TEOS). The partial hydrolysis of TEOS (Si[OEt]4) results in the conversion of ethoxy groups to hydroxyl groups forming silanols. Subsequent condensation of silanols will form siloxane bonds (-Si-O-Si-O-) and eventually cause the material to gel. Dynasylan® SILBOND® 40 is often used as an intermediate, which is further hydrolyzed to produce a binder that can be used for many applications. Several of these end-uses include inorganic zinc-rich primers, investment casting molds, cores and ceramic shapes, coatings, and thermal insulation.

AP 5135 is low viscosity, reactive poly-amido amine hardener for epoxy resins based lacquers and coatings.

EHC10000S60 Titanium Dioxide is a pigment used in floor coatings, protective coatings, solventborne coatings, and cast epoxies. It features excellent stability, high color strength, and low viscosity.

UCECOAT® 7733 is a UV-curable polyurethane dispersion characterized by its outstanding stain resistances both in clear and white pigmented coatings, while still giving flexibility.