Products

CYCAT® 296-9 is an unique acid catalyst developed to accelerate the cure of Cymel amino resins at normal baking temperatures, and to permit the cure of clear finishes and enamels within relatively low temperature ranges.

SILCOLEASE™ PC-94 is an emulsion of Dioctyl Tin Dilaurate. This is the catalyst component of a silicone release formulation and promotes polymerization through a polycondensation reaction.

Cotin® 200 is a dibutyltin dilaurate, a liquid organotin catalyst recommended for the manufacture of silicone and polyurethane systems. It can be used in these primary reactions as well as secondary types such as allophanate and biuret formation.

Coscat® 83 is an organobismuth compound that was specifically developed as a catalyst for two component, polyurethane systems. For soft to medium hardness systems the addition of a zinc catalyst can reduce a potential lag in final cure, yielding a stronger final cure typical of a mercury-based catalyst.

General Catalyst GC-008 is a kind of indoor and outdoor general type catalyst, it is self-crosslinking, can improve the adhesion of the film, does not affect the flow and gloss, has the effect of anti-yellowing property. It can completely improve the mechanical properties of the film when cures at 160 degrees to 200 degrees. It can be used as a curing accelerator for epoxy powder coating, epoxy/polyester powder coating and pure polyester /TGIC powder coating to improve curing effect, or as an internal catalyst containing carboxyl polyester resins to reduce curing temperature or shorten curing time. In indoor and outdoor system, curing condition can achieve 160 degrees /15-20 minutes, 170 degrees /10-15 minutes, 200 degrees /3-5 minutes , flow and mechanical properties are good.GC-008 could completely replace imidazoles, diphenylimidazoline and other catalysts which are easy to get yellowing and affect the leveling and storage stability, General Catalyst GC-008 is the upgrading product of them.

Cotin® 227 is a dibutyltin diacetate, a liquid organotin catalyst recommended for the manufacture of silicone and polyurethane systems. It can be used in these primary reactions as well as secondary types such as allophanate and biuret formation.

CYCAT® 600A is an organic acid catalyst recommended to accelerate the crosslinking reaction of amino resins with polymers containing hydroxyl, carboxyl, or amide functionality. CYCAT® 600A is soluble in aliphatic and aromatic hydrocarbons, esters, ketones, alcohols, glycol ethers and water. It may be used as a replacement for less soluble acid catalysts, such as para-toluene sulfonic acid, in low alcohol-containing formulations. For formulation of 1K systems, CYCAT® 600A should be blocked with an appropriate amine, such as AMP (2-amino-2-methyl-1-propanol).