Products

Stainban™ 186 is a zinc free, odorless, aqueous tannin stain inhibitor additive for water based primers. The unique mechanism of this product allows it to effectively block tannins in stains, and pigmented coatings. It can be easily incorporated at any stage of the paint manufacturing process and is compatible with a wide range of surfactant and dispersants. StainbanTM 186 is effective at any PVC value of primers, however, it is more economical at higher PVC. It may reduce or eliminate the need for zinc oxide in primer formulations. Paints made with StainbanTM 186 have good storage stability and improved humidity resistance. It is HAPS free and does not contribute to VOC. Typical use level ranges from 1 - 4% based upon total formula weight.

Kalama® VITROFLEX® B is a unique blend of dibenzoates specially tailored for the polysulfide market. This benzoate plasticizer is useful particularly in the B-side component of 2K polysulfide sealants. Kalama® VITROFLEX® B imparts good rheology for suspension stability of dispersed solids, elasticity, fast cure rates, and hardness development.

Exolit® AP 422 is a fine-particle ammonium polyphosphate (phase II) produced by a special method. The product is largely insoluble in water and completely insoluble in organic solvents. It is colorless, non-hygroscopic and non-flammable.

EBECRYL® 767 is used in radiation-curable coatings and functions as a binder and resin in CASE ingredients.

HYDROGRAL® G5 is a glycerol ester of partially hydrogenated rosin. It shows a low acid value and an excellent resistance to oxidation. It is specially recommended for the formulation of chewing gum base.

EBECRYL® 450 is a fatty acid modified polyester hexaacrylate. Because of the special structure of the backbone and the high acrylic functionality, EBECRYL® 450 provides the proper hydrophilic-lipophilic balance necessary for lithography, combined with high reactivity when cured by ultraviolet light (UV) or an electron beam (EB). Lithographic inks based on EBECRYL® 450 display outstanding printing qualities, including excellent ink transfer, good dot definition, and proper tack and rheological properties.

Bleumina® 219 is a series of Medium/High Color Furnace (MCF/HCF) blacks that provide excellent esthetics, along with high durability, in the final product. With very low particle size and a balance of structure, it exhibits good UV protection, high jetness, and gloss.

Bleumina® 361 is a series of Medium/High Color Furnace (MCF/HCF) blacks that provide excellent esthetics, along with high durability, in the final product. With very low particle size and a balance of structure, it exhibits good UV protection, high jetness, and gloss.

Bayferrox® 522 is a high-quality inorganic iron oxide pigment, specifically iron(III) oxide. This pigment is commonly used for applications requiring reliable and stable color performance. It is free from the substances listed under California Proposition 65, ensuring compliance with relevant health and safety regulations. Bayferrox® 522 is well-suited for a variety of industrial uses, providing consistent color and durability.

ACRYSOL™ ASE-95NP is a single-ingredient acrylates copolymer thickener with water as a carrier. It is also known as ethyl acrylate-methacrylic acid copolymer.

KRYSTOL™ 550 is a white mineral oil lubricant used as an internal lubricant in plastics and elastomers. It is also used in adhesives, sealants, fluids, and lubricants markets.

AEROSIL® R 8200 is a structure modified with hexamethyldisilazane aftertreated fumed silica.

H.B. Fuller® PD-8081-H is a binder and resin used in waterborne adhesives for adhesives and sealants markets.