Products

Dynasylan® HYDROSIL 2627 is an aqueous oligomeric aminoalkyl-functional silane hydrolysate. It is a colorless to slightly yellowish aqueous solution with an amine-like odour, miscible with alcohols or water.

SURFYNOL® 465 is a good substrate wetting agent with verygood solubility in aqueous systems. It is suitable for waterborne coatings and inks.

CARBOWET® GA-211 is a non-ionic grind aid for waterborne formulations. Focus on pigment wetting. Additionally helps deaeration of the millbase.

HIKOREZ® T-2093 is pale yellow thermoplastic resin obtained from polymerizing unsaturated aliphatic olefins and diolefins derived from the process of thermal cracking of naphtha. The major usages are hot melt based pressure sensitive adhesive(HMPSA), especially Stryene-Isoprene-Styrene (SIS) based PSA. And this grade also can be used as tackifier for hot melt adhesive(HMA), because of its good compatibility with base polymer such as EVA.

AEROSIL® R 812 Coating is a fumed silica after-treated with organosilane (HDMDS) with high specific surface and marked hydrophobia.

HIKOREZ® T-2095 is pale yellow thermoplastic resin obtained from polymerizing unsaturated aliphatic olefins and diolefins derived from the process of thermal cracking of naphtha. The major usages are hot melt based pressure sensitive adhesive(HMPSA), especially Stryene-Isoprene-Styrene (SIS) based PSA. And this grade also can be used as tackifier for hot melt adhesive(HMA), because of its good compatibility with base polymer such as EVA.

Ceridust® 6050 M is a micronized metallocene-based polypropylene wax.

Licocene® PP 7502 granules is a high melting metallocene technology based polypropylene homopolymer, which exhibits a high degree of crystallinity.

K-FLEX® DP is dipropylene glycol dibenzoate, which is one of the oldest members of the benzoate plasticizer family and one of the most versatile polar, high solvating plasticizers still commercially available. K-FLEX® DP is compatible with a wide range of polar polymers and rubbers and is often blended with other plasticizers such as K-FLEX® DP (diethylene glycol dibenzoate).

SILIKOPON® EF is a binder and resin used in 2K coatings, protective coatings, solventborne coatings, and solventless and high solids coatings. It provides color retention and good gloss retention.

Exolit® IFR 36 is a non-halogenated flame retardant based on ammonium polyphosphate, which develops its effectiveness through phosphorus/nitrogen synergism. Exolit® IFR 36 differs in its mode of action from chlorine or bromine containing flame retardants by achieving its effect through intumescence. The flame retarded material foams on exposure to flame. The carbon foam layer so formed protects the polymer through its heat insulating effect and reduces further oxygen access.

CARBOWET® GA-221 is a non-ionic grind aid for waterborne formulations with focus on organic pigments and carbon blacks. Low influence on the coating properties.

CYMEL® 1123 Resin is a highly methylated/ethylated benzoguanamine resin developed primarily for use as a crosslinking agent in electrocoating and conventional coatings requiring high detergent and chemical resistance. Its excellent balance between adhesion and film flexibility, especially after several cure cycles, makes CYMEL® 1123 Resin particularly well suited for can coating applications. While CYMEL® 1123 Resin is insoluble in water, it shows excellent compatibility with water soluble backbone polymers and provides very good stability in pH-buffered alkaline waterborne formulations. The poor light resistance properties of benzoguanamine makes CYMEL® 1123 Resin unsuitable for exterior applications.

ACEMATT® TS 100 is an untreated thermal silica with outstanding properties. It provides very high efficiency and transparency. It can be used in a large variety of coatings.