Products

EBECRYL® LED 04 is an acrylated polyamine that can be added as a co-resin to UV curable formulations. EBECRYL® LED 04 when combined with an appropriate photo initiator system transforms formulations into UV LED, UVA, or low energy curable systems by providing improved surface cure. In addition, this effect is also seen in high energy cure formulations. The improved surface cure is obtained by mitigating oxygen inhibition of the free radical process and/or by being an amine synergist for Norrish type II photo initiators. Coating and inks based on EBECRYL® LED 04 exhibit a low odor after UV or EB curing. Due to its hydrophobic nature EBECRYL® LED 04 can also be used in offset inks applications as a replacement of aminobenzoate synergists.

AP 5000 is a low viscosity, reactive polyamide hardener solution in isopropyl alcohol for epoxy resins based lacquers and coatings.

EBECRYL® 8800-20R is an aliphatic urethane acrylate diluted with the reactive diluents tripropylene glycol diacrylate (TPGDA) (1) and ethoxyethoxyethyl acrylate (EOEOEA)(2). Films of EBECRYL® 8800-20R cured by ultraviolet light (UV) or electron beam (EB) exhibit toughness, flexibility, good exterior durability and resistance to yellowing.

ZINC STEARATE GP SF 5895 is a low bulk density, very fine white powder.

D.E.H.® 612 is a modified aliphatic amine hardener produced without the use of nonylphenol. It is used as an epoxy curing agent for rapid-set and low temperature cure systems and provides high gloss coatings with good blush resistance, high strength, and good chemical resistance. It can be used alone or as an accelerator for other amines.

LOTADER® 3410 is a random ethylene-butyl acrylate-maleic anhydride terpolymer. LOTADER® 3410 is a versatile adhesive for extrusion coating or lamination, designed as: Concentrate to be used in dry blend with LDPE. LOTADER® 3410 improves adhesion of LDPE on aluminium foils, metallized or primerized films. Ready for use resin to be used pure. LOTADER® 3410 gives excellent adhesion on substrates likes aluminium foil, metallized plastics, paper, board, PE and some plastic films like BOPP. Coextrusion tie layer for PE/PA in extrusion coating process. LOTADER® 3410 can also be used as a coupling agent for mineral filled compounds such as halogen free flame retardant wires and cables, a compatibiliser for polyamide/polyolefin blends and a modifier for polyamides.

TEGO® Glide 496 provides outstanding slip and touch properties without compromising recoatatability and compatibility. It is highly effective and can be used in a broad range of different coating and ink systems.

EBECRYL® 264 is an aliphatic urethane triacrylate diluted 15% by weight with the reactive diluent 1,6-hexanediol diacrylate (HDDA). Films of EBECRYL® 264 cured by ultraviolet light (UV) or electron beam (EB) exhibit good flexibility, abrasion resistance, and are resistant to yellowing.

IBOA is a monofunctional reactive diluent that polymerizes when exposed to sources of free radicals. The bicyclic structure of IBOA gives rise to polymers of increased Tg, while its monofunctionality minimizes crosslinking to provide coatings and inks with good hardness and resiliency combined with flexibility and impact resistance.

TEGO® Foamex 16 is a defoamer concentrate based on polyether siloxane technology. Offers a good balance between effectiveness and compatibility. Developed for architectural paints.

SPECIAL Black HF liq./OF is a dye used in felt tip writing pen inks, fineliner ink, inkjet ink, and waterborne inks.

BAYSCRIPT® Yellow 4GF is a single-ingredient organic pigment, identified as Pigment Yellow 150. It belongs to the chemical family of chemical mixtures and blends. This pigment is used primarily in inkjet ink applications.

PARALOID™ A-21 30% Resin is a very hard methyl methacrylate type polymer with enhanced adhesion properties. It is provided as a 30% solution in a toluene/butanol system. The polymer is also available in a solid grade form. Lacquers formulated with PARALOID™ A-21 30% Resin possess excellent intercoat adhesion, hardness, and outdoor durability. PARALOID™ A-21 30% Resin will air-dry rapidly to give clear, colorless films that have excellent resistance to yellowing.

RHOPLEX® 585 is a 100% acrylic binder designed for premium exterior performance in flat and satin Architectural Coatings. It is supplied at high solids for formulation flexibility and does not contain any APEO (alkyl phenol ethoxylate) surfactants. The low coalescent demand of RHOPLEX® 585 allows the formulator to meet the 50g/VOC regulations while still maintaining some freeze thaw stability. Due to its 100% acrylic composition, RHOPLEX® 585 offers good exterior durability.

RE:CHEMISTRY SOLVE100 is a pure ester-based Solvent.100% Biogenic Carbon according to ASTM D6866-20.Readily biodegradable. Non-flammable and Low volatile. Classified as Non-corrosive, Non-sensitising and Non-toxic. Miscible in conventional organic solvents and water. Ethyl Levulinate is a GRAS.