Products

WANNATE® HT-90BS is an aliphatic polyisocyanate based on hexamethylene diisocyanate (HDI) and dissolved in 10% of n-butyl acetate and solvent naphtha 100 (1:1) mixed solvent, colorless to slightly yellowish clear liquid.

TEGO® Glide 435 shows good slip effect and substrate wetting without stabilizing foam. It is highly recommended for radiation-curable coatings.

POLYMEG® 1000 is a glycol ether used in polymer manufacturing applications.

CRAYVALLAC® WF-9200 is a micronised PTFE modified polyethylene wax.

ZETASPERSE® 179 is a non-ionic wetting and dispersing additive with focuson pigment wetting. Showsoutstanding color strength development as co-dispersant toan anionicpolymer. Improves color acceptance when used in thedirectgrindof a basepaint.

Metasol® TK-25 A.D. is a chemical mixture used in building and construction, fluids and lubricants, industrial applications, and industrial and assembly adhesives.

DERTOL® 85 is a mixture of terpene alcohols and hydrocarbons. DERTOL® 85 is characterized by its high content in terpene alcohols, mainly terpineol isomers.

REAFREE® 8589-T is a binder and resin used in varnish applications.

3M™ Ceramic Microspheres W-210 is a unique, semi-transparent, white-colored, fine particle size, high-strength microspheres. 3M™ Ceramic Microspheres W-210 is typically used to reduce VOC levels; increase filler loadings; improve hardness; and add burnish, scrub and abrasion resistance to a variety of coating formulations. Due to the ceramic chemistry of 3M™ Ceramic Microspheres W-210, it is also UV transparent down to 250 nm and have utility in radiation-curable and thin-film powder coatings.

AEROSIL® R 805 Coating is a fumed silica after-treated with organosilane. It providesutmost transparency.

CRAYVALLAC® PC is a micronised hydrogenated castor oil derivative surface enhancing additive for powder coatings based on PRIMID, hybrid and TGIC technologies. CRAYVALLAC® PC is easily incorporated using conventional pre-mixing techniques prior to extrusion. The use of CRAYVALLAC® PC leads to a substantial improvement in the appearance of the final cured powder coating. This improvement is due to CRAYVALLAC® PC enhancing the flow, levelling and degassing processes during cure. This is the result of CRAYVALLAC® PC greatly reducing the melt viscosity during this critical levelling stage in the cure cycle. This viscosity reduction also enhances the performance of other additives such as acrylic levelling agents and the degassing agent benzoin. CRAYVALLAC® PC works well in both clear and pigmented powder coating systems based on PRIMID, Hybrid and TGIC technologies.

SURFYNOL® SEis a multi-functional additive that combines excellent wetting properties with very good foam control in water borne coatings and inks. It is a self-emulsified surfactant that provides ease of incorporation.

WWT674105 Orange 34 is a pigment used as a case ingredient in industrial markets.

Dynasylan® 6598 is an oligomeric siloxane containing vinyl, propyl and ethoxy groups. Dynasylan® 6598 is a further development of Dynasylan®VTMOEO, vinyl-tris(2-methoxy ethoxy)silane. Dynasylan® 6598 is a colorless, nearly odorless low-viscosity liquid. Dynasylan® 6598 is an excellent silane compatibiliser between inorganic fillers (e.g. kaolin, MDH, ATH) and organic polymers (EPDM, EVA, PE).

TEGO® Rad 2330 is an efficient low-foaming radically cross-linkable substrate wetting and slip additive, providing wetting and flow properties. Recommended for broad areas of application.