Products

DOCCO 007 Gloss Oil is a 70% solids gloss rosin varnish dissolved in solvent naphtha. In comparison to DOCCO #006, DOCCO #007 Gloss Oil dries faster and to a higher hardness.

CRAYVALLAC® SLW is a high performance micronized amide wax rheology modifier designed for manufacture of one component Silyl-Terminated-Polymer based adhesives and sealants, especially for highly filled systems (demanding applications, High-Tack systems for instance).

Preventol® A 12-TK 48 is for the manufacture of aqueous and solvent formulations for preservation of wood composites, wood in above-ground and in ground applications, leather, films, glues, adhesives, and metalworking fluids.

Coscat® 83 is an organobismuth compound that was specifically developed as a catalyst for two component, polyurethane systems. For soft to medium hardness systems the addition of a zinc catalyst can reduce a potential lag in final cure, yielding a stronger final cure typical of a mercury-based catalyst.

EPOLENE® DE-84P is an oxidized high density low molecular weight polyethylene powder with exceptional hardness and low color used in PVC lubrication and emulsifiable applications. This material provides excellent lubrication for rigid PVC processing, providing an anti-sticking effect and efficient die lubrication. EPOLENE® DE-84P polymer has high thermal stability and tolerates higher processing temperatures without die build-up. It performs well in high-speed buffable floor finish emulsions, and provides excellent scuff and rub resistance for inks and coating applications.

CARPOL® PGP-4025 is a propylene glycol-initiated polyether polyol. The resulting material has a functionality of two and an average molecular weight of 4000 Da. This diol is polymerized with propylene oxide and then capped with 25% ethylene oxide. The outcome is a polyol with enhanced reactivity when compared to its counterpart CARPOL® PGP-4000. Main applications include C.A.S.E., however, CARPOL® PGP-4025 may also be included as a component in other urethane products and formulations.

Wayncor™ 211 is an anti-corrosion inhibitive pigment that is very effective in solvent and water based epoxy primers. It does not affect the pot life of 2K systems. It can also be used alone or as a synergist with Zinc Phosphate. Typical use level is between 3 - 7 % total formula weight.

REAFREE® 6694 is a binder and resin used in powder coating applications.

CARPOL® GP-5015 is a glycerin-initiated polyether polyol. The resulting material has a functionality of three and an average molecular weight of 5000 Da. This triol is polymerized with propylene oxide and then capped with 15% ethylene oxide. The outcome is a polyol with enhanced reactivity. Main applications include C.A.S.E., however, CARPOL® GP-5015 may also be included as a component in other urethane products and applications.

CRAYVALLAC® SLX is a high performance micronised amide wax rheology modifier designed for the low temperature manufacture of moisture curing methoxysilane systems, where processing temperatures typically lie within the range 60 - 90°C. CRAYVALLAC® SLX particles are converted to an interacting network of crystalline fibres. It is this network that gives rise to the shear thinning rheology. This shear thinning characteristic provides for a low viscosity at the shear rates associated with application by extrusion, and a very high viscosity under the low shear rates experienced after application. The net result is ease of application followed by excellent sag and slump resistance.

Wayncor™ 219 is a zinc aluminum orthophosphate hydrate. It is a free flowing white powder intended for the use in anti-corrosion primer applications. Its pH allows it to be formulated into a wide range of formulas but is particularly effective in solvent systems and water based epoxies. Typical use levels range between 2 - 7% total formula weight.

Toyal PCF 400AG is used in paints and coatings markets and functions as a pigment.

RHOPLEX® SG-10C is a versatile 100% copolymer that was designed for use in high-quality interior/exterior semigloss paints. RHOPLEX® SG-10C provides paint formulators with an opportunity to achieve excellent early and ultimate block resistance, and very good flow and leveling. This product establishes a new level of performance for aqueous applications. RHOPLEX® SG-10C is an APEO (alkyl phenol ethoxylate) surfactant free1 binder and contains no intentionally added PFAS.

CARPOL® GP-3000-60 is a glycerin-initiated polyether polyol. The resulting material has a functionality of three and an average molecular weight of 3000 Da. This triol is polymerized solely with propylene oxide for controlled reactivity. Main applications include C.A.S.E., however, CARPOL® GP-3000-60 may also be included as a component in other urethane products and formulations.

Stainban™ 186 is a zinc free, odorless, aqueous tannin stain inhibitor additive for water based primers. The unique mechanism of this product allows it to effectively block tannins in stains, and pigmented coatings. It can be easily incorporated at any stage of the paint manufacturing process and is compatible with a wide range of surfactant and dispersants. StainbanTM 186 is effective at any PVC value of primers, however, it is more economical at higher PVC. It may reduce or eliminate the need for zinc oxide in primer formulations. Paints made with StainbanTM 186 have good storage stability and improved humidity resistance. It is HAPS free and does not contribute to VOC. Typical use level ranges from 1 - 4% based upon total formula weight.