Products

HYDROGRAL® is a hydrogenated rosin. The hydrogenation of rosin improves stability (ageing, UV resistance).

Orient Black® N774 is a low surface area, low structure, soft grade carbon black providing high resilience, good elasticity resistance and bending resistance.

NuTone® 373 is a low structure, high jetness pigment black that is broadly applicable in a variety of coating applications.

DERMULSENE® RE 1513 is an aqueous, solvent free resin based on stabilized rosin ester.

ROYALE BLACK® EI 37 is a low structure specialty pigment black designed to exhibit high color strength, jetness and gloss in printings inks, coatings and other applications. ROYALE BLACK® EI 37 is used primarily in lithographic gloss ink applications where high quality like high gloss and jetness are required. Because of its low structure property, it is also well suited where highly loaded base is desired.

RE:CHEMISTRY CLEAN300 is a pure Ketal Ester-based Solvent.72% Biogenic Carbon according to ASTM D6866-20. Ultimately biodegradable. Non-flammable, Non-combustible and Low volatile (LVP-VOC). Classified as Non-irritant, Non-corrosive, Non-sensitizing and Non-toxic. Miscible in conventional organic solvents and water. Ethyl PG-Acetal Levulinate is a GRAS.

DERCOLYTE® M 105 is produced from the copolymerisation of alpha and beta pinene. It is a bio based resin especially recommended for the formulation of high quality gum bases.

Orient Black® N550 is a low surface area and high structure fast extruding soft grade carbon black offering moderate resilience.

DERCOLYTE® S 115 is produced from the polymerisation of beta pinene. Is a tackifying resin recommended to improve the adhesive properties (tack, adhesion) of solvent based adhesive formulations, particularly in pressure sensitive adhesives (PSA).

Bleumina® 214 is a series of Medium/High Color Furnace (MCF/HCF) blacks that provide excellent esthetics, along with high durability, in the final product. With very low particle size and a balance of structure, it exhibits good UV protection, high jetness, and gloss.

DERTOPHENE® T is a light-colored and low VOC terpene phenolic resin compatible with acrylics, various elastomers and waxs. It allows to improve the performance of hot melt and solvent based adhesives such as specific adhesion and tack.

ZINC OXIDE GRADE 500 is a brilliant white powder manufactured by the French (Indirect) Process. Grade 500 is a popular general use high quality lower lead (Pb) zinc oxide. Grade 500 meets GMP 21CFR110, is USFDA approved as GRAS (Generally Recognized As Safe) at 21cfr182.8991 and is authorized by the USFDA for use wherever GRAS is approved including food contact in rubber, plastics, and coatings. ZINC OXIDE GRADE 500 is also meets the requirements of ASTM specification D79, 2000/53/EC End of Life Vehicles (ELV Directive), 2002/95/EC Restriction of Hazardous Substances Directive (RoHS) for heavy metals and Waste Electrical and Electronic Directive (WEEE), and other regulations where high quality zinc oxide is required. The product is also available in pelleted form (grade 500P), and with around up to 0.1% processing aid/surface treatment (grade 500T) for some rubber mixers.

Bleumina® 219 is a series of Medium/High Color Furnace (MCF/HCF) blacks that provide excellent esthetics, along with high durability, in the final product. With very low particle size and a balance of structure, it exhibits good UV protection, high jetness, and gloss.

Bleumina® 361 is a series of Medium/High Color Furnace (MCF/HCF) blacks that provide excellent esthetics, along with high durability, in the final product. With very low particle size and a balance of structure, it exhibits good UV protection, high jetness, and gloss.