Products

REAFREE® 8597-T is a saturated carboxylated polyester for combination with b-Hydroxyalkylamide type hardeners. Suitable for the formulation of outdoor durable and protective tribochargeable thermosetting powders for electrostatic application. For high gloss systems with improved flow and degassing properties. Gas oven stabilised. TMA free type.

Focus ChloroPar W-50AO is a chlorinated very long chain alkane (C24-28). This product can function as an extreme pressure additive, flame retardant, and plasticizer. A small amount of stabilizer has been added to maintain product quality during transport and storage.

POLYWATE 325 is a natural off-white barium sulfate. Cimbar’s Polywate products are high in purity, high specific gravity, low solubility and are chemically inert. These properties have made Polywate products the industry standard for quality and performance in a wide range of end-use applications.

Cotrol™ AMB is an ammonium benzoate-based flash rust corrosion inhibitor. It is a cost-effective flash rust inhibitor that does not leave water-soluble components in the cured film thereby causing water sensitivity problems.

DURATRACK™ AEH-100 Resin is a waterborne dispersion of an acrylic-epoxy hybrid polymer designed for high performance two-component (2K) coatings useful for durable traffic markings. The unique acrylic-epoxy hybrid technology facilitates the formulation of low VOC coatings with long pot-life, fast dry and hardness development, and excellent durability properties including UV resistance, adhesion and aggregate retention. DURATRACK™ AEH-100 Resin is an epoxy-functional material that can be crosslinked with typical epoxy hardeners, including amine-based hardeners and acid-functional crosslinkers such as acrylic latexes. It is recommended to formulate with DURATRACK™ R-100 Resin as a two-component waterborne system for traffic coating applications. The ease of the formulation and excellent balance of cost and properties facilitated by DURATRACK™ AEH-100 Resin make it an excellent choice for broad area road markings, such as bike lanes, where high durability and low installation cost are desired.

D.E.H.® 508 curing agent is a modified aliphatic amine designed for use with liquid epoxy resins cured at ambient or elevated temperature. It has low viscosity and results in fast set time, high strength and modulus. It also provides good heat and acid and alkali resistance.

Bleumina® 200 is a specialty carbon black grade designed to exhibit high colour and jetness for multi- purpose pigment application in various plastics, ink and coatings with good UV resistance. Morphological properties of Bleumina® 200 are balanced in such a way that it provides a good combination of dispersibility and colour strength, and it offers very good UV protection and smooth surface finish.

VERSAL RED DP2G is a pigment used in decorative paints and industrial coatings. It is compatible with plasticized polyvinyl chloride (PVC-P), polyolefins, and polypropylenes (PP), and is used in plastics and elastomers.

TAMOL® 819 is a dispersant used as a CASE ingredient in chemical mixtures and blends.

TEGO® Foamex 32 is a highly effective and compatible self-emulsifying defoamer concentrate based on polyether siloxane technology. Especially for architectural paints.

D.E.R.® 321 liquid epoxy resin is a reaction product of epichlorohydrin and bisphenol a modified with an aromatic mono-functional reactive diluent.

VANCRYL® 800 is a styrene/acrylic copolymer used in waterborne inks and coatings for graphic arts applications. VANCRYL® 800 provides pigment wetting along with the viscosity stability needed for aqueous gravure and flexographic inks. The transfer properties and hold-out characteristics of inks prepared with VANCRYL 800 are excellent. VANCRYL® 800 is also effective as a protective colloid in the production of styrene-acrylic copolymer emulsions.

SURFYNOL® 104 A is a multifunctional surfactant providing combined dynamic wetting and molecular defoaming in water borne coatings and inks.

AEROSIL® R 7200 Coating is a structure modified fumed silica after treated with methacrylsilane.

WANNATE® HT-80BS is an aliphatic polyisocyanate based on hexamethylene diisocyanate (HDI) and dissolved in of 20% n-butyl acetate and solvent naphtha 100 (1:1), colorless to slightly yellowish clear liquid.