Products

REAFREE® 6818 is a binder and resin used in paints and coatings.

CARPOL® NIONIC™ 1100 is a blend of polyethers, primarily glycerol ethoxylated propoxylated and polyalkylene glycol. It functions as a nonionic surfactant.

CARPOL® PGP-2000-60 initiated polyether polyol. CARPOL® PGP-2000-60 has a functionality of two and an average molecular weight of 2000. This diol is polymerized solely with propylene oxide for controlled reactivity.

CARPOL® EDAP-800 is an ethylenediamine-initiated polyether polyol. The resulting material has a nominal functionality of four and a typical hydroxyl number of 800. This tetrol is polymerized with ethylene and propylene oxides and is autocatalytic due to its amine content. This polyol’s functionality makes it optimal for use in rigid foams as a crosslinking modifier. In addition, CARPOL® EDAP-800 can also be used as a curative for most C.A.S.E. applications.

Waynflash™ 111 is a liquid flash rust inhibitor which contains sodium nitrite as part of its flash rust inhibition matrix. It is a highly effective inhibitor for the flash rusting on ferrous substrates during aqueous paint phase. It has also proven to be affective in preventing in can rusting. Typical used levels range from 0.25 - 1.0% max. based upon total formula weight. It is highly versatile and can be used in any water based systems. WaynflashTM 111 exhibits good paint stability and can be incorporated at any stage of paint manufacturing. It is both HAPS and APEO free.

COPRO® CP-501 is a non-ionically stabilized, carboxylated styrene-butadiene copolymer latex that contains a non-staining antioxidant.

Hybricor™ 204 is an organic/inorganic hybrid corrosion inhibitor pigment, a proven effective replacement for Cr⁶⁺ in aerospace primer applications on aluminum and other non-ferrous substrates. The fine particle size of Hybricor™ 204 (7 Hegman) permits it to be easily incorporated into a coating using a high speed disperser. It is effective in primers, DTM and thin film (20 micron) applications. It does not affect pot life of 2K systems.

REAFREE® 5706 is a binder and resin used in paints and coatings, specifically for varnish applications. It offers excellent flexibility, high gloss, and outdoor durability.

CARPOL® PGP-400 is a propylene glycol-initiated polyether polyol. CARPOL® PGP-400 has a nominal functionality of two and a molecular weight of 400 Da. The low functionality and viscosity of this polyol makes for a versatile product. It may be used in rigid foam systems to lower the viscosity of B-side materials while helping control crosslinking.

PACE® 381 is a vinyl acetate homopolymer made in a polyvinyl alcohol colloidal system

CRAYVALLAC® WF-1039 has been especially designed to give textured finishes to polyester and hybrid powder coating systems. This texturing agent is easily incorporated using conventional premixing techniques prior to extrusion.

RE:CHEMISTRY MOVE200 is a pure ester-based Solvent. 58% Biogenic Carbon (derived from agricultural waste) according to ASTM D6866-20. Readily biodegradable. Non-flammable, Non-combustible and Low volatile. Classified as Non-corrosive, Non-sensitizing and Non-toxic. Miscible in conventional organic solvents and water. Butyl Levulinate is a GRAS.

D.E.H.® 546 curing agent is a low viscosity modified cycloaliphatic amine intended for ambient temperature curing of liquid epoxy resins.

Wayncor™ CIA 300 is a zinc based organic inhibitor. It is effective in a wide variety of systems and can be used as a stand-alone inhibitor or synergistically with other corrosion inhibitors to significantly improve corrosion resistance. It is supplied as an easily dispersible pigment. Typical use levels as a synergistic additive range form 0.5 - 2.5% total formula weight and from 3 - 7% total formula weight as a stand-alone inhibitor.