Products

CRAYVALLAC® EXTRA is a high performance, micronised amide wax rheology modifier suitable for high-solids and solvent-free applications with very high robustness. It is especially recommended in 2K epoxy primers for its high temperature tolerance.CRAYVALLAC® EXTRA overcomes those difficulties which exist with hydrogenated castor oil based rheology modifiers e.g. seeding and false-body and that were maximised when activation was performed at high temperatures.

Wayncor™ 214 is an effective corrosion inhibitive pigment designed for alkyds and other solvent based systems. Typical use level is 3 - 7% total formula weight.

D.E.H.® 445 Epoxy Curing Agent is a modified cylcoalipatic amine based curing agent for epoxy resins. It contains no nonylphenol.

SS-09 is used in industrial coatings, specifically for powder coating applications.

WANNATE® HT-90BS is an aliphatic polyisocyanate based on hexamethylene diisocyanate (HDI) and dissolved in 10% of n-butyl acetate and solvent naphtha 100 (1:1) mixed solvent, colorless to slightly yellowish clear liquid.

POLYMEG® 1000 is a glycol ether used in polymer manufacturing applications.

CRAYVALLAC® WF-9200 is a micronised PTFE modified polyethylene wax.

Metasol® TK-25 A.D. is a chemical mixture used in building and construction, fluids and lubricants, industrial applications, and industrial and assembly adhesives.

DERTOL® 85 is a mixture of terpene alcohols and hydrocarbons. DERTOL® 85 is characterized by its high content in terpene alcohols, mainly terpineol isomers.

REAFREE® 8589-T is a binder and resin used in varnish applications.

3M™ Ceramic Microspheres W-210 is a unique, semi-transparent, white-colored, fine particle size, high-strength microspheres. 3M™ Ceramic Microspheres W-210 is typically used to reduce VOC levels; increase filler loadings; improve hardness; and add burnish, scrub and abrasion resistance to a variety of coating formulations. Due to the ceramic chemistry of 3M™ Ceramic Microspheres W-210, it is also UV transparent down to 250 nm and have utility in radiation-curable and thin-film powder coatings.

CRAYVALLAC® PC is a micronised hydrogenated castor oil derivative surface enhancing additive for powder coatings based on PRIMID, hybrid and TGIC technologies. CRAYVALLAC® PC is easily incorporated using conventional pre-mixing techniques prior to extrusion. The use of CRAYVALLAC® PC leads to a substantial improvement in the appearance of the final cured powder coating. This improvement is due to CRAYVALLAC® PC enhancing the flow, levelling and degassing processes during cure. This is the result of CRAYVALLAC® PC greatly reducing the melt viscosity during this critical levelling stage in the cure cycle. This viscosity reduction also enhances the performance of other additives such as acrylic levelling agents and the degassing agent benzoin. CRAYVALLAC® PC works well in both clear and pigmented powder coating systems based on PRIMID, Hybrid and TGIC technologies.

WWT674105 Orange 34 is a pigment used as a case ingredient in industrial markets.

CARPOL® GP-1500 is a glycerin-initiated polyether polyol. The resulting material has a functionality of three and an average molecular weight of 1500 Da. This triol is polymerized solely with propylene oxide for controlled reactivity. Main applications include C.A.S.E., however, CARPOL® GP-1500 may also be included as a component in other urethane products and formulations.

Cotrol™ AMB is an ammonium benzoate-based flash rust corrosion inhibitor. It is a cost-effective flash rust inhibitor that does not leave water-soluble components in the cured film thereby causing water sensitivity problems.