Products

TEGO® DISPers 747 W is an anionic wetting and dispersing additive for water borne architectural formulations. Wets and stabilizes iron oxides with very effective viscosity reduction.Enables high pigment loadings with inorganic pigments and is able to stabilize organic pigments. As a dispersant in base paints, it shows excellent color acceptance.

TEGO® DISPers 650 is a non-ionic wetting and dispersing additive that can be used in waterborne and solventborne formulations and in universal colorants. Especially for organic pigments;providesexcellent color strength development.

TEGO® Foamex 852 is an effective defoamer concentrate based on polyether siloxane technology. Suitable for pigmented and clear formulations.

Polycin® 53 is a 100% solids, multifunctional castor oil-based derivative designed for use as a polyol or reactive diluent in polyurethane systems. It will impart flexibility and improved pigment wetting into many polyurethane systems. Polycin® 53, as a reactive diluent, will allow for VOC reduction while imparting the beneficial properties of castor oil derivatives, such as improved flow and leveling.

CRAYVALLAC® EXTRA is a high performance, micronised amide wax rheology modifier suitable for high-solids and solvent-free applications with very high robustness. It is especially recommended in 2K epoxy primers for its high temperature tolerance.CRAYVALLAC® EXTRA overcomes those difficulties which exist with hydrogenated castor oil based rheology modifiers e.g. seeding and false-body and that were maximised when activation was performed at high temperatures.

ACRYSOL™ RM-995 offers both enhanced viscosity stability to colorant addition and improved sag resistance to broad-wall paints. ACRYSOL™ RM-995 is a solvent-free (Manufactured without added solvent), hydrophobically modified ethylene oxide urethane (HEUR) rheology modifier based on proprietary technology. This KU-builder rheology modifier offers the properties that HEUR technology is known for, e.g., excellent flow, gloss development and applicability both interior and exterior, with improved performance in viscosity stability upon tinting and excellent sag resistance.

TEGO® DISPers 752 W is an anionic wetting and dispersing additive for transparent iron oxides and transparent titanium dioxide in waterborne formulations. Provides outstanding transparency, high pigment loadings, and long-term stability, especially when used in binder-free dispersions.

TEGO® DISPers 757 W is an anionic,high polymeric wetting and dispersing additive for waterborne dispersions in industrial and transportation coatings. Stabilizes inorganic and organic pigments with very low influence on the water resistance of the coating. When used in colorants, It showsonly minimal influence on the rheology of the tinted coating.

DERMULSENE® 222 is an aqueous, solvent free resin based on a mixture of terpene resin and rosin ester.

Polycin® 640 M-1 is a solventless, castor oil-based polyol for use in polyurethane formulations, Secondary hydroxyl functionality provides longer open time and work life. Polycin 640-Ml will produce a polyurethane with a mid- to high Shore D hardness when cured with MDI-based adducts.

TEGO® AIREX 902 W is a highly effective and compatible deaerator emulsion based on polyether siloxane technology. Outstandingly effective against micro- and macro-foam.

TEGO® DISPers 750 W is a slightly anionic,polymeric wetting and dispersing additive for high-quality water borne formulations. Very compatible.Suitable for all kinds of pigments. With inorganic pigments,outstanding stabilization performance

TEGO® Foamex 840 is an effective defoamer concentrate based on polyether siloxane technology. Contains no fumed silica. Provides good long-term effectiveness and additional deaeration effect.

TEGO® DISPers 690 is a polymeric highly efficient wetting and dispersing additive for solvent borne formulations. Especially suitable for solvent borne flexo inks, even NC-free inks. Wets and stabilizes organic pigments and carbon blacks.

CRAYVALLAC® SL is a high performance micronised amide wax rheology modifier designed for the high temperature manufacture of moisture curing methoxysilanes systems, where processing temperatures typically lie within the range 90 – 115°C. CRAYVALLAC® SL particles are converted to an interacting network of crystalline fibres. It is this network that gives rise to the shear thinning rheology. This shear thinning characteristic provides for a low viscosity at the shear rates associated with application by extrusion, and a very high viscosity under the low shear rates experienced after application. The net result is ease of application followed by excellent sag and slump resistance.