Products

ACRYSOL™ DR-6600 offers the same performance as ACRYSOL RM-6, but without the use of APEO surfactants. ACRYSOL DR-6600 offers excellent gloss, film build and flow in latex paints. ACRYSOL DR-6600 is both APEO-free and solventfree and is thus well suited to meeting the latest regulatory requirements, under the proper conditions, for waterborne paints and coatings. ACRYSOL DR-6600 is effective in improving the high shear (ICI Cone and; Plate) viscosity, resulting in coatings that have high film build characteristics for improved hiding and appearance. Other benefits to the manufacturer include a virtual absence of roller spatter and the full realization of gloss potential for latex paints. Since ACRYSOL DR-6600 is of the hydrophobically-modified alkali-soluble chemistry it offers excellent long-term viscosity stability because it is inherently resistant to degradation through both enzymatic and bacterial routes.

ACRYSOL™ SCT-275 Rheology Modifier is an efficient nonionic polyethylene oxide(HEUR) associative rheology modifier which can impart excellent rheological properties including flow and leveling, uniform film formation and film build, to latex based coatings. ACRYSOL™ SCT-275 Rheology Modifier is recommended for use in flat to semigloss paints and primers for both exterior paints and premium interior paints.It is especially suited to replace or be blended with conventional cellulosic thickeners where improved flow and leveling, increased hiding, and spatter resistance is desired. ACRYSOL™ SCT-275 Rheology Modifier is particularly suited for low solids, vinyl acrylic formulations where it yields excellent flow/sag balance, color acceptance, and syneresis resistance. ACRYSOL™ SCT-275 Rheology Modifier is supplied as a low viscosity liquid that is easy to handle and incorporate in the paint making process.

AP 5986 is low viscosity, benzyl alcohol and nonyl phenol free modified cycloaliphatic amine hardener for epoxy resin based coatings.

TEGO® Phobe 1650 is a silicone resin emulsion for the efficient reduction of the capillary water uptake of coating formulations.

RHOPLEX® CL-105 is designed for use in factory-applied, waterborne, acrylic wood finishes that require warmth, clarity, grain character and sandability. Sealers based on this emulsion have excellent sanding characteristics without the addition of stearates or other sanding aids. Formulations based on RHOPLEX® CL-105 are clear from the moment they are applied due to their excellent wet film clarity. These formulations also dry very rapidly. Clear lacquers based on RHOPLEX® CL-105 are formulated to have very low VOC and HAPS content, important advantages over solvent borne lacquers.

D.E.H.® 612 is a modified aliphatic amine hardener produced without the use of nonylphenol. It is used as an epoxy curing agent for rapid-set and low temperature cure systems and provides high gloss coatings with good blush resistance, high strength, and good chemical resistance. It can be used alone or as an accelerator for other amines.

TEGO® DISPers 656 is a widely usable wetting and dispersing additive. Suitable for solvent borne, waterborne, and radiation-curing formulations and for universal colorants. Primarily stabilizes inorganic pigments, fillers,and effect pigments like aluminum pigments.

RHOPLEX® AC-261LF is an all-acrylic emulsion polymer for latex floor paints. Its adhesion and abrasion resistance have been designed for this application. It is also suitable for quality exterior semi-gloss trim paints.

CRAYVALLAC® LV is a high performance, micronised amide wax rheology modifier suitable for very high-solids and solvent-free applications.CRAYVALLAC® LV overcomes those difficulties which exist with hydrogenated castor oil based rheology modifiers e.g. seeding and false-body. Consequently, coatings formulated using CRAYVALLAC® LV exhibit an enhanced performance such as controlled flow behavior, ease of application and excellent sag resistance. Its very high efficiency even when activated allows to reach very strong shear thinning that can result either in very high sag resistance or interresting balance between viscosity and sag resistance. Therefore CRAYVALLAC® LV is for instance highly recommended in the case of solvent free coatings with relatively low viscosity. It prevents the use of specific equipment for the application that are necessary with more viscous solvent-free coatings.

D.E.H.® 290 curing agent is a light colored modified aliphatic amine hardener that is used to cure epoxy resins. D.E.H.® 290 amine curing agent provides a quick return to service, low modulus, and relatively good color stability. Flexible epoxy membranes can be formulated using D.E.H.® 290 curing agent.

ELVACE® CPS 720 is a polyvinyl alcohol stabilized vinyl acetate-ethylene copolymer.

D.E.R.® 324 is formulation for a high solids epoxy coating which may be applied with a roller over a properly pre-treated concrete surface. D.E.R.® 324 or d.E.R.® 353 epoxy resin can be used for the roller coating with similar performance.

Dynasylan® HYDROSIL 1151 is an amino-functional silane which acts as an adhesion promoter between inorganic materials (for example glass, metals and fillers) and organic polymers (thermosets, thermoplastics and elastomers). Dynasylan® HYDROSIL 1151 is a colorless to slightly yellowish aqueous solution with an amine-like odur, miscible, with alcohols or water. Dynasylan® HYDROSIL 1151 contains about 40% active silane content in water.

TEGO® Phobe 1409 is an amino-siloxane emulsion for the hydrophobization of coating formulations. It reduces the water uptake and generates a water-beading effect, even in paints with high pH value.

APODIL 1014 is a high viscosity, aliphatic polyepoxide (tetra-functional or higher) reactive diluent based on sorbitol or glucitol (bio-based). It is compatible with all types of epoxy resins in any proportion.