Products

DzBh Baling® YH-188E is a linear styrene/butadiene block copolymer. Environmental protection material. It doesn't contain nonyl phenol.

HIKOTACK® P-90S is pale yellow thermoplastic resin obtained from polymerizing unsaturated aromatic olefins and diolefins derived from the process of thermal cracking of naphtha. The major usages are rubber compounding agent for tires, tubes, rubber coated clothes. HIKOTACK® P-90S can be used as tackifier for Ethylene Vinyl Acetate (EVA) based hot melt adhesive (HMA), water repellent agent, concrete curing agent and binder for asphalt.

PTMEG-650 is used in industrial and assembly adhesives and is compatible with polyamide, polyesters, and polyurethane substrates.

DzBh Baling® SIS YH-1125 is a clear, linear block copolymer based on styrene and isoprene with a polystyrene content of 25%.

NuTone® 305 is a general purpose carbon black. Compared with other regular color carbon blacks, it has better jetness with good dispersibility. It is suitable for printing inks, adhesives and sealants and other applications, i.e. paints and coatings. It is also recommended for liquid phase conductive application.

REAFREE® 4763-S is a binder and resin used in coil coating and powder coating applications. It offers excellent flow, good mechanical properties, high gloss, high reactivity, outdoor durability, and reduced blooming.

Paricin® 220 is N-(2-hydroxyethyl)-12-hydroxy- stearamide. It is a high melting point wax like material that has broad compatibility with natural and synthetic waxes, resins and polymers to provide excellent slip and lubricating properties.

D.E.R.® 542 is a solid epoxy resin of the tetrabromobisphenol-A epichlorohydrin type.D.E.R.® 542 is a solid, brominated epoxy resin designed for use where maximum bromine is needed to offset large ratios of hardener or non-brominated resin. The improved purity of D.E.R.® 542 makes it especially suitable for electronic related applications where maximum performance and reliability are desired.

Wayncor™ 222 is a white, non-refractive, anti-corrosive pigment used in protective coatings. It is widely considered by the coatings industry to be a standard corrosion inhibitor. It exhibits a high degree of versatility and is compatible with almost all commercially available aqueous and solvent based coatings. The use level will vary depending upon resin system, pigment volume concentration and desired performance parameters, however typical use levels are between 3 - 10% total formula weight.

SIPERNAT® 820 A represents a specific product range of precipitated silica, aluminium and calcium silicates. SIPERNAT® 820 A is a sodium aluminum silicate with a high level of whiteness and reduced coarse particles.

D.E.R.® 692H is a low molecular weight "2.5-type" epoxy resin with Flow modifier.

RGC™ 39T is a partially graphitized carbon product manufactured using Superior Graphite’s proprietary electro-thermal purifi cation technology. RGC™ 39T higher porosity plays a major role in important properties, such as resiliency, sound dampening, wear rate and friction reduction, heat dissipation, shock wave mitigation and others. Best suited applications are tribology and thermal conductivity in both thermosets and thermoplastics. Porous structure also provides better compatibility with polymeric chains during compounding. RGC™ 39T specific sizing process makes its non-fluffy even at a very fine size range, which makes it a suitable candidate for polymeric coatings.

REAFREE® 5703 is a binder and resin used in paints and coatings.

HYDROGRAL® P is a pentaerythritol ester of partially hydrogenated rosin. It is specially recommended to improve oxidation resistance and long term adhesive performances of pressure sensitive adhesives.