Products

SURFYNOL® DF 58 is an effectivede foamer concentrate based on polyether siloxane technology. Excellent foam knockdown.

TEGO® DISPers 747 W is an anionic wetting and dispersing additive for water borne architectural formulations. Wets and stabilizes iron oxides with very effective viscosity reduction.Enables high pigment loadings with inorganic pigments and is able to stabilize organic pigments. As a dispersant in base paints, it shows excellent color acceptance.

AEROSIL® R 106 Coating is a hydrophobic fumed silica surface treated with D4 (octamethylcyclotetrasiloxane).

AEROSIL® R 972 RHE Coating is a fumed silica after-treated with DDS (dimethyldichlorosilane). It is easytodisperseand suitablefor a broad rangeof applications.

CARBOWET® GA-221 is a non-ionic grind aid for waterborne formulations with focus on organic pigments and carbon blacks. Low influence on the coating properties.

Dynasylan® SIVO 250 is a methacrylfunctional silane that can be used as adhesion promoter, surface modifier, co-monomer for polymer synthesis and crosslinker. Dynasylan® SIVO 250 is a clear, colorless liquid. It is soluble in alcohols, and aliphatic or aromatic hydrocarbons.

TEGO® DISPers 650 is a non-ionic wetting and dispersing additive that can be used in waterborne and solventborne formulations and in universal colorants. Especially for organic pigments;providesexcellent color strength development.

AEROSIL® 300 Coating is a hydrophilic fumed silica with a specific surface area of 300 m²/g. It provides a very strong rheological effect.

TEGO® Foamex 852 is an effective defoamer concentrate based on polyether siloxane technology. Suitable for pigmented and clear formulations.

TEGO® Wet KL 245 is a highly active siloxane-based substrate wetting additive. It shows very good substrate wetting properties on difficult substrates like wood and plastic. It is highly compatible and recommended for water borne and solvent borne coatings.

SURFYNOL® 485 W is a low-viscosity substrate wetting agent for water borne coatings and inks with high solubility in aqueous systems. SURFYNOL® 485 W can also be used for its stabilization and emulsification properties

Dynasylan® IBTMO, an alkyltrialkoxysilane is an important surface modifier and component in sol­gel systems. Dynasylan® IBTMO, an alkyltrialkoxysilane is an important surface modifier and component in sol­gel systems. Dynasylan® IBTMO, an alkyltrialkoxysilane is an important surface modifier and component in sol­gel systems. Dynasylan® IBTMO is a colorless, low­viscosity liquid. Dynasylan® IBTMO is regarded as trifunctional since all three alkoxy groups are able to hydrolyze. Additionally Dynasylan® IBTMO contains an isobutyl group that adds organic character to the products. Hydrolysis leads to silanol groups which, in a subsequent condensation reaction, form very stable siloxane bonds (­Si­O­Si­). Condensation occurs parallel to hydrolysis once a certain amount of silanol groups have been formed. The absolute and relative rates of hydrolysis and condensation depend on a number of factors. The most important factors include pH, concentration, solvent, temperature and the catalyst.

Dynasylan® SIVO 408 is an oligomeric short-chain alkylfunctional silane. Dynasylan® SIVO 408 is a clear, colorless to slightly yellow liquid and soluble in common organic solvents (e.g. petroleum ether, toluene, alcohol). Because of its unique structure and viscosity Dynasylan® SIVO 408 is an easy-to-handle additive.

TEGO® DISPers 752 W is an anionic wetting and dispersing additive for transparent iron oxides and transparent titanium dioxide in waterborne formulations. Provides outstanding transparency, high pigment loadings, and long-term stability, especially when used in binder-free dispersions.