Products

TEGO® Glide 432 shows very good slip and substrate wetting properties. It is highly recommended for radiation-curable coatings.

D.E.H.® 545 hardener is a low viscosity formulated polyamidoamine adduct specially designed for wet application areas. It may be formulated with liquid Bisphenol A and/or Bisphenol F epoxy resins for optimum adhesion on dry and wet concrete substrates. D.E.R.® 353 and D.E.R.® 324 are recommended epoxy resins for use with D.E.H.® 545 as a starting formulation of primer systems.

β-CEA is a mixture of reactive esters, each of which contain both acrylate and carboxylic acid functionality in the same molecule. Referring to the included structural formula, this mixture contains some unreacted acrylic acid (n=0), along with higher adducts of acrylic acid (n=1,2,3...). The dimer (n=1). β-CEA, is the largest single component, and the average molecular weight is equivalent to that of the dimer. β-CEA will polymerize when exposed to sources of free radicals. Because of its carboxylic acid functionality, β-CEA is useful as an adhesion promoter.

LOTRYL® 24MA02T is a random ethylene-methyl acrylate copolymer.

EBECRYL® 7110 is an acrylated amine primarily used as a hydrogen donor, or photoactivator, in ultraviolet light (UV) curable coatings and inks. When used in formulations in combination with a photosensitizer (e.g. benzophenone), EBECRYL® 7110provides rapid UV cure response in air by mitigating the effects of oxygen inhibition at the coating or ink surface. Unlike conventional tertiary amines such as N-methyldiethanolamine, EBECRYL® 7110 reacts to become part of the UV cured polymer, resulting in lower residual odor and improved moisture resistance. EBECRYL® 7110 also promotes adhesion to plastic substrates and lowers viscosity when used as a primary component in UV adhesives and coatings.

Exolit® OP 945 is a white, fine-grained powder based on an organic phosphinate with a D95 of less than 5 um. The product is not hygroscopic and it is insoluble in water an common organic solvents like acetone, dichloromethane, MEK, toluene. Exolit® OP 945 can easily be dispersed in solvents like acetone or MEK.

WANAMINE™ H12MDA is a cycloaliphatic amine used as a curing agent in case ingredients and plastics and elastomers.

Clearstrength® E980 is a new methyl methacrylate butadiene- styrene (MBS) core-shell toughening agent designed to impart excellent ambient and cold temperature toughness to thermosetting resins. Clearstrength® E980 toughening agent is produced using a proprietary technology resulting in better dispersion capability in liquid monomers like (meth)acrylics, epoxies and polyesters.

Inhibicor™ 1000 corrosion inhibitor pigment is an effective replacement for Cr6+ in Aerospace primer applications on Aluminum.

CARBOWET® GA-221 is a non-ionic grind aid for waterborne formulations with focus on organic pigments and carbon blacks. Low influence on the coating properties.

Hostavin® 3051-2 disp. is a 52% aqueous dispersion of a low molecular weight hindered amine light stabilizer (HALS). It is characterized by its easy incorporation, low volatility and broad compatibility with a wide range of waterborne coating systems.

LOTADER® 9305 is a random ethylene-vinyl acetate-maleic anhydride terpolymer (EVA- MAH). As an ethylene copolymer, OREVAC® T 9305 is compatible with PE in all proportions, and with most ethylene copolymers. Vinyl acetate brings softness, flexibility and polarity while maleic anhydride brings reactivity, leading to versatile adhesive properties to polar and non-polar substrates. LOTADER® 9305 is compatible with most tackifying resins and waxes and can be used in hot melt adhesives formulations. LOTADER® 9305 is also suitable to produce thermo-adhesive films for solid substrates like PA, PET and PU films, aluminium foils.

Araldite PT 810 is an isocyanurate based, crystalline polyepoxide compound suitable for the formulation of polyester or acrylic resin based powder coatings for outdoor applications. It imparts good weather resistance due to its highly stable heterocyclic ring. Its three functional epoxide groups ensure high reactivity and cross-linking density when it is reacted either with carboxyl-containing oil-free polyesters based on aromatic dicarboxylic acids or with carboxyl-containing acrylic resins. The powders cure without releasing volatiles.

Aquolin® 161 is a water dispersible polyisocyanate based on hexamethylene diisocyanate (HDI). In combination with water-borne polyurethane, polyacrylate, etc., it can be used for adhesive products to improve the resistance to hydrolysis and heat. It also can be used for waterborne coatings. After addition of Aquolin® 161, the ready-to- use mixture must be used within the pot life. Aquolin®161 can be diluted with the solvents, such as propylene glycol methyl ether acetate (PMA), propylene glycol diacetate (PGDA), butyl acetate, etc. Only PU grade solvents (max. 0.05% water) should be used and the solvents must be tested in advance by the user to determine suitability.

AP 3120 is a low viscosity, low color hardener for epoxy resins based clear coatings.