Products

Dynasylan® VTMOEO is a bifunctional organosilane possessing a reactive vinyl group and a hydrolyzable 2­methoxy­ethoxy- silyl group.

AP 1300 is a medium-viscosity reactive, Phenalkamine-epoxy resin adduct hardener solution for epoxy based lacquers and coatings.

Dynasylan® BDAC functions as a surface modifier in CASE ingredients and plastics and elastomers.

RHOPLEX® WP-1 is a plasticizer classified as a chemical mixture and blend.

D.E.H.® 623 is a curing agent used with epoxies (EP) in CASE ingredients.

D.E.H.® 536 cycloaliphatic amine hardener is used as a curing agent for epoxy resins in applications requiring good color and fast-set.

K-FLEX® 850P is a blend of dipropylene glycol dibenzoate and diethylene glycol dibenzoate specifically designed for vinyl applications with economy as a focus. It is similar in composition to K-FLEX® 850P (diethylene glycol dibenzoate rich). By composition it is a non- phthalate. As a high solvator for vinyl it can be formulated alone or in blends for plastisols as well as melt compounded vinyl.

D.E.H.® 581 curing agent is a low viscosity amine hardener for epoxy resins. It is a fast curing hardener and offers good low temperature cure. It results in a blush-free product and has good water spot resistance and excellent chemical resistance to acids and solvents. It can also be used as an accelerator for other hardeners in coatings and civil engineering.

Exolit® AP 740 F is a white free flowing powder. It is a non-halogenated additive flame retardant based on ammonium polyphosphate which develops its effectiveness through phosphorus/nitrogen synergism. Exolit® AP 740 F differs in its mode of action from chlorine or bromine containing flame retardants by achieving its effect through intumescence The flame retarded material foams on exposure to flame. The carbon foam layer so formed protects the polymer through its heat-insulating effect and reduces further oxygen access.

D.E.H.® 043L curing agent is a modified cycloaliphatic polyamine used as curing agent for epoxy resins. It has good color stability and produces light resistant products. It also has high acid and solvent resistance, excellent early water spot resistance and offers long pot life.

D.E.H.® 611 is a curing agent used with epoxies (EP) in CASE ingredients.

AEROSIL® 200 Coating is a hydrophilicfumed silica with a specific surface area of 200 m²/g. Widely usable in a broad range of applications.

D.E.H.® 55 Epoxy Curing Agent is a medium viscosity modified aliphatic polyamine curing agent. D.E.H.® 55 Epoxy Curing Agent is extremely reactive with liquid epoxy resins at room temperature and is used in maintenance paints, 2 pack adhesives, civil engineering, castings and hand lay-up laminates.

D.E.H.® 26 Curing Agent is an economical liquid aliphatic polyamine hardener, tetraethylenepentamine (TEPA), that offers a short pot-life and cures in minutes with standard unmodified liquid epoxy resins. Similar to D.E.H.® 24 Epoxy Curing Agent in application, it provides lower vapor hazard to workers due to its higher boiling point. D.E.H.® 26 Epoxy Curing Agent is used for maintenance paints, the manufacture of epoxy-amine adducts, in adhesives, and civil engineering applications. It is also used as an accelerator for polyamide curing agents. In electrical applications, D.E.H.® 26 Curing Agent is used for casting, potting and encapsulation.

AP 1063 is very a low viscosity, 100 % solids reactive Phenalkamine adduct hardener with improved blush resistance. It is suitable for low temperature curing of epoxy coating.