Products

COPRO® SP-591 is an alkali swellable acrylic emulsion polymer.

CRAYVALLAC® PA3 WDA 20 is a pre-activated amide wax supplied in a mixture of mineral spirit (D60) and alcohols. Under paste form for post-addition to solvent-based low polarity coating systems, it provides a shear-thinning rheology with thixotropic viscosity recovery to coating formulations. In coating systems, its crystalline fibres form an interacting network which gives rise to the shear-thinning rheology of the final coating. It provides a very high viscosity under the low shear rates associated with sedimentation, and a low viscosity at the much higher application shear rates. The net result is excellent control of sedimentation combined with ease of application. Immediately following application, the coating’s viscosity undergoes a time dependent recovery as the network re-establishes itself. This time dependence is known as thixotropy and enables the final coating to attain very good levelling.

Licowax® PE 130 granules is a high density polyethylene wax.

AEROSIL® R 974 W Coating is a hydrophobic fumed silica after-treated with DDS (Dimethyldichlorosilane) based on a hydrophilic fumed silica with a specific surface area of 200 m²/g. The product thickening efficiency of AEROSIL® R 974 W Coating ex RHE is consistent with the Waterford-produced AEROSIL® R 974. This profile is different than the thickening profile of standard RHE quality.

AddWorks® LXR™ 313 is a mixture of a triazine UV absorber with a low molecular weight hindered amine light stabilizer (HALS), designed for high performance stabilization of paints and clearcoats, and characterized by its broad compatibilities in both solventborne and waterborne coatings.

Hostavin® 3053 liq is the 80% solution of a low molecular weight hindered amine light stabilizer (HALS) in xylene. It is characterized by its excellent solubility, broad compatibility, extremely low volatility and migration stability.

CRAYVALLAC® SUPER is a high performance, micronised amide wax rheology modifier suitable for a wide range of solvent-based, high-solids and solvent-free applications. CRAYVALLAC® SUPER overcomes those difficulties which exist with hydrogenated castor oil based rheology modifiers e.g. seeding and false-body. Consequently, coatings formulated using CRAYVALLAC® SUPER exhibit an enhanced performance such as controlled flow behavior, ease of application and excellent sag resistanceIts smooth viscosity recovery will help to achieve high film thickness without compromising a good levelling.

TEGO® Glide B 1484 combines flow promotion with deaerating properties in solvent-free and solvent-borne coatings. It supports orientation of matting agents.

AERODISP® W 7622 is a low viscosity, water-based dispersion of aerosil fumed silica with a slightly alkaline pH

BS-1C-A7 is an organoclay for solvent-based systems of medium-high polarity.

Bermocoll® Prime 1500 is a non-ionic, water soluble cellulose ether with enhanced enzymatic resistance. and superior color stability. It improves the consistency, the stability, and the water retention of water based paints.

AEROSIL® R 711 is a fumed silica aftertreated with a methacrylsilane.

CRAYVALLAC® LA-250 is a modified urea dissolved in DMSO and is a pourable liquid rheology modifier for post addition to low polarity solvent based coatings. CRAYVALLAC® LA-250 should be added to the coating as a slow stream under low to medium shear conditions to ensure sufficient dispersion. Although efficient stirring is required to ensure homogeneity, elevated temperatures are not required for activation and the use of excessive shear should be avoided.

TEGO® Glide 450 provides excellent flow and leveling combined with strong slip properties. It is recoatable and can be used in solvent and waterborne coatings.

CRAYVALLAC® SLT is a high performance micronised amide wax rheology modifier designed for activation-free manufacture of moisture curing methoxysilane based systems. Simple stirring is only necessary to get full efficiency. CRAYVALLAC® SLT is also suitable for the activation-free manufacture of moisture curing methoxysilane based adhesives. CRAYVALLAC® SLT is specially designed for the low temperature manufacture of one-component methoxysilane sealants where processing temperatures typically lie within the range 30 - 80°C. CRAYVALLAC® SLT particles are converted to an interacting network of crystalline fibres. It is this network that gives rise to the shear thinning rheology. This shear thinning characteristic provides for a low viscosity at the shear rates associated with application by extrusion, and a veryhigh viscosity under the low shear rates experienced after application. The net result is ease of application followed by excellent sag and slump resistance.