Products

SUKOREZ® NX-710 is a waterwhite thermoplasic resin obtained from polymerization and hydrogenation of cyclic ingredients. The major usages are tackifier for hot melt adhesive(HMA), hot melt pressure sensitive adhesive(HMPSA) and solvent based pressure sensitive adhesive(SBPSA), because of its good heat resistance and good compatibility with base polymers such as metallocene catalyzed polyolefin(me-PO), ethylene vinyl acetate(EVA), styrene block copolymer(SBC) and amorphous polyalphaolefin(APAO).

ACEMATT® OK 630 is a wax-treated, medium particle-sized precipitated silica. By offering very high compatibility, it can be used in a large variety of coatings.

TEGO® Rad 2330 is an efficient low-foaming radically cross-linkable substrate wetting and slip additive, providing wetting and flow properties. Recommended for broad areas of application.

SUKOREZ® SU-500 is a hydrogenated water white C5/Cyclic hydrocarbon resin with softening point around 100°C. it can be used in hot melt PSAs and hot melt adhesives with good compatibility with SIS, EVA, polyolefins and etc. Especially, it can be used for applications where require good thermal stability in terms of color.

TEGO® Glide 492 shows very good slip and anti-blocking properties in waterborne formulations. It is free of aromatic solvents and tin, additionally suitable for eco-label compliant formulations.

ACEMATT® OK 390 is a wax-treated, finer grade matting agent based on precipitated silica. Due toits high compatibility, it can be used in a large variety of coatings.

ACEMATT® OK 500 is a wax-treated, medium particle sized precipitated silica. By offering very high compatibility, it can be used in a large variety of coatings. It has been optimized to have a minimal impact on drying times.

TEGO® Flow 425 is a universal, siloxane-based flow and anti-crater additive. It is highly compatible and suitable for a broad range of coatings.

TEGO® Rad 2250 (Germany) is a broadly usable radically cross-linkable slip agent for clear coats. It provides efficient wetting, slip, and flow combined with very good compatibility.

SUKOREZ® SU-100 is a waterwhite thermoplasic resin obtained from polymerization and hydrogenation of cyclic ingredients. The major usages are tackifier for hot melt adhesive(HMA), hot melt pressure sensitive adhesive(HMPSA) and solvent based pressure sensitive adhesive(SBPSA), because of its good heat resistance and good compatibility with base polymers such as ethylene vinyl acetate(EVA), styrene block copolymer(SBC).

TEGO®Flow 375 is a silicone-free acrylic leveling agent. It offers excellent compatibility and good flow promotion. It is highly recommended for solventborne clear coatings.

TEGO® Glide 490 shows outstanding slip and anti-blocking properties in waterborne coatings. The product is free of aromatic solvents and tin.

HIKOTACK® P-140 is pale yellow thermoplastic resin obtained from polymerizing unsaturated aromatic olefins and diolefins derived from the process of thermal cracking of naphtha. The major usages are vehicles for printing ink. This grade especially shows superior compatibility with rosin modified phenolic resin, so it can be used with phenolic resin in off-set ink to decrease the set time and increase the gloss. This grade also can be used as binder for color asphlat and tackifier for EVA based hot melt adhesive (HMA).

SUKOREZ® SU-400 is waterwhite thermoplastic resin obtained from polymerizing of C5/Cyclic/Aromatic and hydrogenation. The major usages are tackifier for hot melt adhesive(HMA), hot melt pressure sensitive adhesive (HMPSA) because of its good heat resistance and good compatibility with base polymers such as ethylene vinyl acetate (EVA), Styrene-Butadiene-Styene block copolymer(SBS), Styrene-Isoprene-Styene block copolymer(SIS).