Products

Dynasylan® HS2926 is a surface modifier, coupling agent, and crosslinking agent compatible with elastomers, rubbers, glass, metal, mineral substrates, thermoplastics, and thermosetting plastics. It functions as a coupling agent, crosslinking agent, and surface modifier in industrial additives.

Dynasylan® MEMO is a methacrylfunctional silane that can be used as adhesion promoter, surface modifier, co-monomer for polymer synthesis and crosslinker. Dynasylan® MEMO is a clear, colorless liquid. It is soluble in alcohols, and aliphatic or aromatic hydrocarbons.

EBECRYL® 1300 is designed as the letdown oligomer for UV thermoformable ink applications, and should be used in conjunction with the pigment grind oligomer, EBECRYL® 8413. EBECRYL® 1300 exhibits good adhesion promoting properties. When used together with EBECRYL® 8413, non-blocking thermoformable inks can be developed. These thermoformable inks demonstrate scratch and temperature resistance, as well as excellent adhesion to a variety of plastic substrates without the necessity of corona discharge or flame pretreatment.

CARPOL® PGP-2000-60 initiated polyether polyol. CARPOL® PGP-2000-60 has a functionality of two and an average molecular weight of 2000. This diol is polymerized solely with propylene oxide for controlled reactivity.

CARPOL® EDAP-800 is an ethylenediamine-initiated polyether polyol. The resulting material has a nominal functionality of four and a typical hydroxyl number of 800. This tetrol is polymerized with ethylene and propylene oxides and is autocatalytic due to its amine content. This polyol’s functionality makes it optimal for use in rigid foams as a crosslinking modifier. In addition, CARPOL® EDAP-800 can also be used as a curative for most C.A.S.E. applications.

Polycin® 1679-M3 is a 100% solids, castor oil-based derivative designed for use as a primary polyol or reactive diluent in polyurethane sealants and adhesives systems. Polycin® 1679-M3 imparts medium hardness and provides VOC reduction while offering the beneficial properties of castor oil derivatives, such as improved flow and levelling.

ALCOTEX 975 is a chemical blend, including methanol and 2-butanol. It is a single-ingredient product primarily used as a crosslinking agent in various CASE (Coatings, Adhesives, Sealants, and Elastomers) applications.

CYMEL® U-227-8 Resin is a general-purpose n-butylated urea resin that combines fast curing speed with excellent enamel stability in pigmented systems. It is compatible with low and medium molecular weight epoxy resins and is recommended for use in epoxy/urea metal primers, metal decorating, and drum and dipping enamels. CYMEL® U-227-8 Resin is also recommended as a pigment grinding vehicle. It is supplied in a mixture of n-butanol and xylene.

CARPOL® PGP-400 is a propylene glycol-initiated polyether polyol. CARPOL® PGP-400 has a nominal functionality of two and a molecular weight of 400 Da. The low functionality and viscosity of this polyol makes for a versatile product. It may be used in rigid foam systems to lower the viscosity of B-side materials while helping control crosslinking.

CYMEL® U-216-10LF resin is an n-butylated urea resin which has excellent compatibility with hydrophobic resins, including epoxies. It is the HAPS-free version of CYMEL®® 216-8 resin with the additional benefit of lower free formaldehyde. It was designed for metal deco coatings, can coatings and coil coating primers. CYMEL® U-216-10LF resin may also be added as a leveling agent in cold-cure amine catalyzed epoxy resin systems. Approximately 3% of CYMEL® U-216-10LF on a solids basis imparts improved flow properties.

EBECRYL® 3411 is a fatty acid modified bisphenol A epoxy diacrylate resin with relatively low viscosity, good flow and leveling, and excellent pigment wetting properties. Films of EBECRYL® 3411 cured by ultraviolet light (UV) or electron beam (EB) demonstrate high gloss, a degree of toughness and good chemical resistance.

CYMEL® U-1054 resin is a partially n-butylated urea crosslinking agent supplied in a mixture of n-butanol and ethanol. CYMEL® U-1054 resin is suitable for industrial heat cured primer formulations because of the excellent adhesion, water and corrosion resistance properties. In can coating formulations, CYMEL® U-1054 provides an excellent balance between adhesion and film flexibility, especially after several cure cycles.

EBECRYL® 1710 is an acrylic polymer diluted 60% by weight with the reactive diluent 1,6-hexanediol diacrylate (HDDA)(1). EBECRYL® 1710 is used as the primary or a modifying oligomer in ultraviolet light (UV) or electron beam (EB) curable formulations to improve film properties such as adhesion and lay-down.

CARPOL® GP-700 is a glycerin-initiated polyether polyol. The resulting material has a functionality of three and an average molecular weight of 700 Da. This triol is polymerized solely with propylene oxide for controlled reactivity. Main applications include C.A.S.E. and flexible foam, however, CARPOL® GP-700 may also be included as a component in other urethane products and formulations.

Dynasylan® BTSE is the only commercially available bipodal alkylsilane. It is used in numerous applications where its nature as an excellent crosslinking agent is crucial. Its use usually requires acid- or alkali-catalysed hydrolysis. Since all six ethoxy groups are able to participate in this reaction, Dynasylan® BTSE is regarded as hexafunctional. Hydrolysis leads to silanol groups which, in a subsequent condensation reaction, form very stable siloxane bonds (-Si-O-Si-). Condensation starts before hydrolysis is complete. During storage of these hydrolysates, condensation continues until a gel is formed.