Products

Bluesil™ RES 6405 is a 50% solids methylphenylsilicone resins in Toluene (6405) or Xylene solution (6405X). These resins are ideal for the formulation of heat resistant coatings for industrial applications with improved weatherability.

D.E.N.® 438-EK85 is a solution of a semi-solid reaction product of epichlorohydrin and phenol-formaldehyde novolac in methyl ethyl ketone.

EBECRYL® 83 is an amine modified polyether acrylate that exhibits low viscosity and fast cure via exposure to ultraviolet light (UV). Films of EBECRYL 83 cured by UV or electron beam (EB) demonstrate high gloss, solvent resistance and low residual odor. EBECRYL 83 is especially suited to applications requiring low viscosity and fast UV cure, including overprint varnishes and flexographic inks.

EBECRYL® 876 is a polyester acrylate resin designed for use in UV/EB curable coating applications, in particular over-print varnishes (OPVs). EBECRYL 876 provides a bisphenol A (BPA) free alternative to epoxy acrylate based formulations while providing equivalent performance properties such as fast cure response, high gloss, hardness and excellent chemical resistance.

VANCRYL® 965 emulsion is a very low glass transition temperature acrylic polymer designed for film printing applications in the graphic arts industry. Inks made from this polymer exhibit excellent gloss, adhesion to polyolefins, ice water crinkle resistance, and fine printing characteristics. VANCRYL® 965 also has the unusual combined properties of excellent resolubility and fast drying. These properties are needed when converting flexible packaging printing from solvent-based to water-based formulations. VANCRYL® 965 emulsion is compatible with VANCRYL® 68 pigment dispersions as well as other commonly used pigment dispersions. It also exhibits excellent compatibility with additives such as surfactants, adhesion promoters, alcohols, and waxes. VANCRYL® 965 can be used as the backbone of printing inks and overprint coatings where various COF or slide resistance requirements are needed, from a range of 0.25 to 0.45.

HP9825-TOFA Short Oil Alkyd is a short oil, chain stopped alkyd resin based on tall oil fatty acid. It is formulated for air-dry enamels, spray paints, and baking enamels. It exhibits good overbake resistance

NANOCRYL® C 130 shows the highest performance in scratch- and abrasion-resistance without influencing gloss or transparency of the cured UV-coating.

RHOPLEX® R-225 is designed to be used in release coatings for masking tapes. It offers tape manufacturers the application advantages of water-based systems. This polymer is simple to formulate, requires no catalyst, and offers the good initial release and re-adhesion characteristics that are obtained with solvent-based release systems.

EBECRYL® 50 is the tetraacrylate ester of 5 mole ethoxylated pentaerythritol. It is a low viscosity diluting oligomer characterized by low odor and light color. EBECRYL® 50 provides fast cure response in ultraviolet light (UV) or electron beam (EB) cured coatings and inks. Besides its high reactivity, EBECRYL® 50 improves the hardness and solvent resistance of cured coatings and inks. EBECRYL® 50 is particularly useful in offset inks, flexo inks and overprint varnishes.

EBECRYL® 367 is a polyester acrylate, developed to improve the adhesion of inks and varnishes onto plastics.