Products

CARPOL® PGP-2000 is a propylene glycol-initiated polyether polyol. CARPOL® PGP-2000 has a functionality of two and an average molecular weight of 2000 Da. This diol is polymerized solely with propylene oxide for controlled reactivity.

CARPOL® PGP-4025 is a propylene glycol-initiated polyether polyol. The resulting material has a functionality of two and an average molecular weight of 4000 Da. This diol is polymerized with propylene oxide and then capped with 25% ethylene oxide. The outcome is a polyol with enhanced reactivity when compared to its counterpart CARPOL® PGP-4000. Main applications include C.A.S.E., however, CARPOL® PGP-4025 may also be included as a component in other urethane products and formulations.

CARPOL® GP-5171 is a glycerin-initiated polyether polyol. The resulting material has a nominal functionality of three and an average molecular weight of 5000 Da. This triol is polymerized with propylene oxide and then capped with 71% ethylene oxide. The outcome is a polyol with enhanced reactivity. Main applications include flexible foam, however, CARPOL® GP-5171 may also be included as a component in other urethane products and applications.

CARPOL® GP-4520 is a glycerin-initiated polyether polyol. The resulting material has a functionality of three and an average molecular weight of 4500 Da. This triol is polymerized with propylene oxide and then capped with 20% ethylene oxide. Main applications include C.A.S.E., however, CARPOL® GP-4520 may also be included as a component in other urethane products and formulations.

PTMEG-220 is polytetramethylene ether glycol, a polyol used in chemical manufacturing and paints and coatings.

CARPOL® MX-425 is a Mannich-based polyether polyol. The resulting product has a nominal functionality of approximately four and a targeted hydroxyl number of 425. The presence of amine in this polyol creates a material that is autocatalytic. Due to this, CARPOL® MX-425 is suitable for spray foam formulations in addition to any other application that demands a fast cure.

CARPOL® PGP-400-50 is a propylene glycol-initiated polyether polyol. The resulting material has a nominal functionality of two and a molecular weight of 400 Da. The low functionality and viscosity of this polyol makes for a versatile product. It may be used in rigid foam systems to lower the viscosity of B-side materials while helping control crosslinking.

CARPOL® GP-5171-60 Polyol is a glycerin-initiated polyether polyol. The resulting material has a nominal functionality of three and an average molecular weight of 5000 Da. This triol is polymerized with propylene oxide and then capped with 71% ethylene oxide. The outcome is a polyol with enhanced reactivity. Main applications include flexible foam, however, CARPOL® GP-5171-60 Polyol may also be included as a component in other urethane products and applications.

CARPOL® PGP-4025-60 is a propylene glycol initiated polyether polyol. The resulting material has a functionality of two and an average molecular weight of 4000. This diol is polymerized with propylene oxide and then capped with 25% ethylene oxide. The outcome is a polyol with enhanced reactivity when compared to its counterpart Carpol® PGP-4000. Main applications include C.A.S.E., however, Carpol® PGP-4025 may also be included as a component in other urethane products and formulations.

CARPOL® PGP-2012-60 is a propylene glycol-initiated polyether polyol. CARPOL® PGP-2012-60 has a functionality of two and an average molecular weight of 2000 Da. This diol is polymerized with propylene oxide and then capped with 12% ethylene oxide. The outcome is a polyol with enhanced reactivity when compared to its counterpart CARPOL® PGP-2000.

CARPOL® GSP-7216 is a glycerin-initiated polyether polyol formulated to a nominal functionality of 4.2 and a typical hydroxyl value of 31. This ethylene oxide capped polyol is designed to provide a moderate degree of cross-linking and reactivity for high resiliency flexible foam applications. Advantages of using this polyol include increased load bearing, enhanced compression set performance, and the potential for reduced use of graft polyol.

CARPOL® SPA-357 is a sucrose amine-initiated polyether polyol. The high functionality of the initiators yields a resultant polyol with a nominal functionality of 5.5 and a typical hydroxyl number of 350. This polyol’s functionality and short-chained nature make it optimal for use in rigid foam. In addition, CARPOL® SPA-357 contains amine and therefore is autocatalytic. This allows the formulator to use less catalyst while achieving the same reactivity seen in other neutral rigid polyols.

CARPOL® GP-1500 is a glycerin-initiated polyether polyol. The resulting material has a functionality of three and an average molecular weight of 1500 Da. This triol is polymerized solely with propylene oxide for controlled reactivity. Main applications include C.A.S.E., however, CARPOL® GP-1500 may also be included as a component in other urethane products and formulations.

CARPOL® GP-6015-60 is a glycerine initiated polyether polyol. The resulting material has a functionality of three and an average molecular weight of 6000. This triol is polymerized with propylene oxide and then capped with 15% ethylene oxide. The outcome is a polyol with enhanced reactivity. Main applications include C.A.S.E., as this polyol has low total unsaturation levels and an anti-oxidant package taylored for this type of market.

Crystal® O PC is a triglyceride expressed from the seeds of the ricinus communis plant. Crystal® O PC is a refined castor oil with excellent oxidative stability. It is odorless, tasteless, light in color, and has good clarity.