Products

Focus DISPerse 900M is a highly branched succinic anhydride that can be used in metalworking formulations as a primary emulsifier for emulsifiable (soluble) oils and semi-synthetics after being neutralized.

PC-1344™ Defoamer is a highly viscous organic polymer. It enhances air release properties and prevents foam formation in acidic or neutral organic fluids at temperatures up to 400 °F. It also performs in some alkaline systems. It has demonstrated an ability to retain its defoaming capacity over extended periods of time. It works without materially affecting the surface tension of the media. PC-1344™ Defoamer contains no silicone. PC-1344 Defoamer applications include usage in gear oils, specialty lubricants, and hydraulic, turbine, or transmission oils. Typical use levels range from 20 ppm to 2000 ppm (0.2 %).

Additin® RC 2315 is an extreme pressure additive used in cutting oils, forming fluids, greases, and metalworking fluids. It is characterized by its extreme pressure performance, low pour point, and low viscosity.

Focus Nilfoam 718 is a free-rinsing, organo silicone emulsion and is very effective on a range of surfactant based foams in water-based systems. Focus Nilfoam 718 will effectively control foam in a variety of applications including metalworking coolants, water-based adhesives, wastewater treatment systems, and latex systems.

Hybase® C-402 is a 400 TBN oil soluble overbased calcium sulfonate. It is typically used as a detergent and rust inhibitor in crankcase lubricants and is designed for good compatibility with other detergent types, such as calcium phenate.

Focus ChloroPar P-52 is a chlorinated paraffin based on a medium-chain (C14-16) paraffin. This product can function as an extreme pressure additive, flame retardant, and plasticizer. A small amount of stabilizer has been added to maintain product quality during transport and storage.

HFGEL 120-Q is an organoclay for solvent-based systems of low to medium polarity.

LIALET 125-9 is a fatty alcohol polyethyleneglycol ether, based on LIAL 125 and ethylene oxide (about 9 moles). It is manufactured in Terranova dei Passerini (LO) plant.

Hybase® C313 is a 300 TBN oil soluble overbased calcium sulfonate. Hybase® C313 is a typically used as a detergent and rust inhibitor in crankcase lubricants. It can be used as the sole detergent but will also work well in conjunction with other detergent types, such as calcium phenate. It is optimized for excellent water tolerance and compatibility.

CARPOL® NIONIC™ P4000 Polyglycol is a linear polymer produced by the polymerization of propylene oxide with propylene glycol. The P4000 nomenclature indicates a propylene oxide-based product with a molecular weight of 4000. It is a clear, viscous liquid at room temperature with a low vapor pressure. It exhibits excellent lubricity and can be used in synthetic lubricant applications. It is suitable as an antifoam agent in latex formulations, pulp and paper processing, emulsion paints, and various food processes.

Hybase® M-12D is a highly overbased magnesium sulfonate fuel oil additive with an average particle size of 0.06 microns containing 12 wt. % magnesium. Hybase® M-12D is a completely oil soluble, clear brown colored liquid with excellent stability in the presence of water. Hybase® M-12D overbased magnesium sulfonate will form high melting point compounds with vanadium during combustion, therefore reducing corrosion of the turbine blades and sulfur trioxide formation.

Additin® M 49.002 is a anticorrosion, Lubricity Additive and Film Former.

Aluminum Stearate 1032 is a medium bulk density, white powder.

Calcinate® C-70 is a 70 TBN oil soluble overbased calcium sulfonate. It has an optimized Soap-to-TBN ratio to provide excellent corrosion inhibition and detergency. CalcinateTM C-70 is designed to remove health concerns over the presence of barium heavy metal coming from overbased barium sulfonates. CalcinateTM C-70 is compatible with Group I, II, and III base oils as well as Group IV synthetic base stocks.

Milled Hurd 60 is the perfect starting point to connect “eco” with industry. IND HEMP hurd fibers are ideal for absorbent applications and biocomposites. Our hurd fiber products are sustainably sourced, rapidly renewable, and expected to be free from dust and foreign materials.