Products

Non-Leafing Type Aluminium Paste TZ-588A is a chemical mixture used in paints and coatings. It features non leafing properties for case ingredient applications.

Non-Leafing Type Aluminium Paste TZ-816A is a chemical mixture with non leafing properties used in case ingredient applications.

Strontium Chromate 176 with the chemical formula of SrCrO4, is the most effective and versatile corrosion inhibitor pigment available. Strontium Chromate 176 is a low dust, low oil absorption pigment compatible with aqueous or solvent borne paint systems and effective on all metals, such as steel, galvanized steel and aluminum alloys. It is widely used in aerospace and coil primers.

Wayncor™ 224 is a white non-refractive, corrosion inhibitive pigment used in protective coatings systems. It is compatible with a wide assortment of commercially available resin systems. It can provide an economic alternative to standard grade zinc phosphate. Performance can vary depending upon choice of resin system, but in general the use level would be between 3 - 10% total formula weight.

Wayncor™ 214 is an effective corrosion inhibitive pigment designed for alkyds and other solvent based systems. Typical use level is 3 - 7% total formula weight.

Non-Leafing Type Aluminium Paste MG1200 is a chemical mixture used in paints and coatings. It features non leafing properties for case ingredient applications.

Toyal TCR3130 belongs to the chemical mixtures and blends family and is used in paints and coatings markets.

Wayncor™ 229 is an effective multi-component, multi-phase synergistic corrosion inhibitor pigment. It is a chrome free product, and is compatible with all commercially available aqueous and solvent based resin systems. The recommended loading levels for water based systems and solvent based systems from 3 - 7% total formula weight.

Wayncor™ 205 is an anti corrosion pigment that utilizes a calcium ion exchange mechanism to inhibit the corrosion process. Its near neutral pH allows it to be used in a wide variety of formulas without a negative impact on paint stability. The fine Hegman grind (6.5 minimum) permits its use in thin film applications (4 - 10 microns) such as coil coatings and in more traditional industrial applications where the dry film thickness is higher. This fine Hegman value also allows the product to be high speed dispersed. The Wayncor™ 205 mechanism works well on both ferrous and non-ferrous substrates. Wayncor™ 205 can be used as the sole corrosion inhibitor or synergistically with other inhibitive technologies.

Non-Leafing Type Aluminium Paste 5680NS is a chemical mixture used in paints and coatings. It features non leafing properties for case ingredient applications.

Non-Leafing Type Aluminium Paste MS-650 is a chemical mixture used in paints and coatings. It features non leafing properties for case ingredient applications.