Products

FlexTalc® 815 are an ultrafine talc product line specifically engineered for use in high performance TPO applications. FlexTalc® products are made by a proprietary process that results in talc products which have very high aspect ratios, are easily dispersed, provide unmatched heat aging and offer exceptional compounded color. They are avalable in powder and compacted (D) forms, lightly compacted (LD) and sized/compacted (DS).

NANO-FLEX® Talc (D) is designed for use in high performance TPO applications that require high brightness and an extremely high balance of stiffness and toughness. It is made by a proprietary process that results in a very high aspect ratio, excellent dispersion, and unmatched heat aging while offering excellent compounded color. NANO-FLEX® Talc (D) is also available in a densified form as NANO-FLEX Talc-D, which can improve handling and initial compounding.

Elevast™ D50 are specialty hydrocarbon fluids designed to enhance the performance and processability of a broad range of polymer systems and applications. Elevast efficiently lowers Tg of polyolefins with carefully designed liquid polymer, with minimal change in crystalline properties and without requiring exquisite morphology control.

CLEAR-BLOC® 100 C is surface coated talc thet are produced from high purity ore to provide high brightness, clarity, low iron content, for use as an anti-block additive in LDPE and LLDPE film applications where blocking, greater polymer stability with improved optical properties are required. CLEAR-BLOC® 100 C is platy, hydrophobic, non-abrasive, and chemically inert and are approved for food contact applications. CLEAR-BLOC® 100 C is produced with a priority process grinding system to improve consistency and uniformity of the material. CLEAR-BLOC® 100 C is available in powder form and in a CS design which increases the bulk density from 12 lbs to 60+ lbd for feed systems requiring a quick mix and complete dispersion of the sized material while increasing the throughput of your line.

ASPECT® 15 is a mid-range talc product line specifically engineered for under-the-hood use in TPO applications when a natural grade is not needed.

CIMTALC® 7 is produced from high purity ore, which provide low iron content, low surface area and excellent color in dry form as well as when incorporated with resins. CIMTALC® 7 is primarily used in performance polypropylene, where improved tensile strength, flexural modulus, heat distortion temperature, increased stiffness, reduced shrinkage, and lower compounding costs are required. CIMTALC® 7 is are platy, hydrophobic, non-abrasive and chemically inert.

Elevast™ D20 are specialty hydrocarbon fluids designed to enhance the performance and processability of a broad range of polymer systems and applications. Elevast efficiently lowers Tg of polyolefins with carefully designed liquid polymer, with minimal change in crystalline properties and without requiring exquisite morphology control.

CLEAR-BLOC® 80C is a surface coated talc that are produced from high purity ore to provide high brightness, clarity, low iron content, for use as an anti-block additive in LDPE and LLDPE film applications where blocking, greater polymer stability with improved optical properties are required. CLEAR-BLOC® 80 and 100 talcs are platy, hydrophobic, non-abrasive, and chemically inert and are approved for food contact applications. CLEAR-BLOC talcs are produced with a priority process grinding system to improve consistency and uniformity of the material.

ZINC STEARATE XM ULTRAFINE HYDENSE is a medium to low bulk density, fine white powder.

Foral® AX resin is a thermoplastic, acidic resin produced by hydrogenating gum rosin to an exceptionally high degree. Foral® AX has a very light initial color and its strong resistance to oxidation results in excellent color retention in a wide range of applications. It is used as a tackifier and resin modifier in solvent adhesives and hot melt applied coatings and adhesives that must excel in these properties.

CIMTUFF® 9110 is produced from high purity ore, which provide low iron content, low surface area and excellent color in dry form as well as when incorporated with resins. CIMTUFF® 9110 is primarily used in performance polypropylene, where improved tensile strength, flexural modulus, heat distortion temperature, increased stiffness, reduced shrinkage, and lower compounding costs are required. CIMTUFF® 9110 is platy, hydrophobic, non-abrasive and chemically inert.

DERTOPHENE® T is a light-colored and low VOC terpene phenolic resin compatible with acrylics, various elastomers and waxs. It allows to improve the performance of hot melt and solvent based adhesives such as specific adhesion and tack.

CIMTUFF® 9100 Talc 9103 is produced from high purity ore, which provide low iron content, low surface area and excellent color in dry form as well as when incorporated with resins. CIMTUFF® 9100 Talc 9103 is primarily used in performance polypropylene, where improved tensile strength, flexural modulus, heat distortion temperature, increased stiffness, reduced shrinkage, and lower compounding costs are required. CIMTUFF® 9100 Talc 9103 is are platy, hydrophobic, non-abrasive and chemically inert.