Products

Exolit® OP 945 is a white, fine-grained powder based on an organic phosphinate with a D95 of less than 5 um. The product is not hygroscopic and it is insoluble in water an common organic solvents like acetone, dichloromethane, MEK, toluene. Exolit® OP 945 can easily be dispersed in solvents like acetone or MEK.

Exolit® OP 560 is a flame retardant that can be used for flexible polyurethane foams. It is a medium-viscosity liquid and it is based on a non-halogenated phosphorus polyol. The product is a reactive flame retardant which can be chemically reacted into the polymeric matrix. Therefore, very low fogging values can be achieved which meet the most stringent emission standards for PU flexible foams in the automotive industry.

Exolit® AP 422 is a fine-particle ammonium polyphosphate (phase II) produced by a special method. The product is largely insoluble in water and completely insoluble in organic solvents. It is colorless, non-hygroscopic and non-flammable.

Exolit® AP 740 S is a white free flowing powder. It is a non-halogenated additive flame retardant based on ammonium polyphosphate which develops its effectiveness through phosphorus/nitrogen synergism. Exolit® AP 740 S differs in its mode of action from chlorine or bromine containing flame retardants by achieving its effect through intumescence and has compared to Exolit® AP 740 a reduced water uptake. The flame retarded material foams on exposure to flame. The carbon foam layer so formed protects the polymer through its heat-insulating effect and reduces further oxygen access.

Exolit® OP 930 is a white, fine-grained powder based on an organic phosphinate. The product is not hygroscopic and it is insoluble in water and common organic solvents lik cetone, dichloromethane, MEK, toluene. Exolit® OP 930 can easily be dispersed in solvents like acetone or MEK.

Exolit® OP 1400 is a non-halogenated flame retardant based on organic phosphinates for reinforced polyamide 6, polyamide 66 and high temperature polyamides. The produt achieves its flame retardant effect through a combined gas phase and condensed phase mode of action. Exolit® OP 1400 is based on a new chemical substance which currently being registered in various national and regional chemical inventories.

Exolit® OP 1240 is a flame retardant based on an organic aluminum phosphinate which is a thermally stable white solid without any hazard classification or labeling. It can be easily compounded into polyesters and subsequently processed again to manufacture flame retarded parts used in consumer or industrial products.

Exolit® IFR 36 is a non-halogenated flame retardant based on ammonium polyphosphate, which develops its effectiveness through phosphorus/nitrogen synergism. Exolit® IFR 36 differs in its mode of action from chlorine- or bromine-containing flame retardants by achieving its effect through intumescence. The flame retarded material foams on exposure to flame. The carbon foam layer so formed protects the polymer through its heat insulating effect and reduces further oxygen access.