Products

ZHENGDA® ZD-1400 Polyether amine(also called Amine-terminated Polyether)is characterized by repeating oxypropylene units in the backbone. As shown by the representative structure, ZHENGDA® ZD-1400 Amine-terminated Polyether is a difunctional, primary amine with average molecular weight of about 4000. The primary amine groups are located on secondary carbon atoms at the end of the aliphatic polyether chains.

Focus ChloroPar P-52 is a chlorinated paraffin based on a medium-chain (C14-16) paraffin. This product can function as an extreme pressure additive, flame retardant, and plasticizer. A small amount of stabilizer has been added to maintain product quality during transport and storage.

HIRENOL® PL-500 has low viscosity, low volatile extender for epoxy, polyurethane and acrylic. Act as a plasticizer, pot-life controller, diluent, modifier. Good color and excellent UV-resistance. Wide process window, non-toxic, good compatibility, storage stability. Excellent performance in adhesion, hardness, water resistance, gloss, toughness, exduation, shrinkage, self-leveling, trowelability.

Focus ChloroPar W-40 is a chlorinated compound based on C21-34 alkanes. This product can function as an extreme pressure additive, flame retardant, and plasticizer. A small amount of stabilizer has been added to maintain product quality during transport and storage.

Focus ChloroPar W-40AO is a chlorinated very long chain alkane (C24-28). This product can function as an extreme pressure additive, flame retardant, and plasticizer. A small amount of stabilizer has been added to maintain product quality during transport and storage.

Focus ChloroPar P-53 is a chlorinated paraffin based on a medium-chain (C14-16) paraffin. This product can function as an extreme pressure additive, flame retardant, and plasticizer. A small amount of stabilizer has been added to maintain product quality during transport and storage.

Focus ChloroPar P-45 is a chlorinated paraffin based on a medium-chain (C14-16) paraffin. This product can function as an extreme pressure additive, flame retardant, and plasticizer. A small amount of stabilizer has been added to maintain product quality during transport and storage.

Citroflex™ A-4 is a low molecular weight citric acid ester partially derived from bio-based raw materials.

Focus ChloroPar W-50AO is a chlorinated very long chain alkane (C24-28). This product can function as an extreme pressure additive, flame retardant, and plasticizer. A small amount of stabilizer has been added to maintain product quality during transport and storage.

Pale 1000 Blown Castor Oil commonly known as blown oils have increasing viscosities resulting from oxidative and crosslink polymerization at the double bonds and hydroxyl groups. Oxidative polymerization of castor oil yields products with increased viscosities and decreasing solubility in aliphatic solvents, increasing compatibility with various resins and improved ability to wet and disperse pigments while imparting solvent and abrasion resistance to lacquer systems. The polymerized oils are used to plasticize a variety of resins in adhesive and sealant systems, inks and hot melts. The heavier viscosity polymerized oils are processing aids and plasticizers for rubber polymers, imparting oil and solvent resistance.

ZINC STEARATE TX PASTILLES are a low bulk density, very fine white powder.

LOTADER® AX8750T is a random Ethylene-Butyl Acrylate - Glycidyl Methacrylate terpolymer (E-BA-GMA). Acrylic ester brings softness and polarity, while keeping high thermal stability during processing. The high content of acrylic ester leads to high flexibility (low crystallinity) and high impact absorption behaviour. Glycidyl methacrylate gives reactivity (versus OH, COOH and NH₂ groups), leading to optimal dispersion during melt mixing with engineering thermoplastics. As an ethylene copolymer, LOTADER® AX8750T is compatible with LDPE in all proportions, and with most of ethylene copolymers. LOTADER® AX8750T is suitable as an additive to improve impact strength of engineering thermoplastics (PPS, PBT, PET) and PC/PBT, PC/PET and PC/ABS alloys. LOTADER® AX8750T can be used as a compatibilizer for polyesters/polyolefins blends, as bitumen performance enhancer and adhesion promoter onto metallic surface.

Exolit® OP 1312 is a non-halogenated flame retardant based on organic phosphinates. The product achieves its flame retardant effect through intumescence. The thermoplastic polymer with Exolit® OP 1312 foams and crosslinks on exposure to flame and forms a stable char at the surface acting as a barrier. The protective layer provides a heat- insulating effect, reduces oxygen access and prevents dripping of molten polymer. Exolit® OP 1312 is a white powder.

Elevast™ A80 modifiers are specialty hydrocarbon fluids designed to enhance the performance and processability of a broad range of polymer systems and applications. Elevast efficiently lowers Tg of polyolefins with carefully designed liquid polymer, with minimal change in crystalline properties and without requiring exquisite morphology control.

Polyfill 203 is a alumina trihydrate and leading flame retardant and smoke suppressant product used in a wide range of industrial applications.