Products

EBECRYL® 8702 is an aliphatic urethane hexaacrylate that offers a multitude of performance properties allowing the formulator the flexibility to meet requirements. Films using EBECRYL® 8702 cured by ultraviolet light (UV) or electron beam (EB) exhibit a combination of hardness, abrasion and impact resistance coupled with good exterior durability.

EBECRYL® 286 is an aliphatic urethane diacrylate oligomer diluted 25% with tripropylene glycol diacrylate (TPGDA) monomer. Films of EBECRYL® 286 cured by ultraviolet light (UV) or electron beam (EB) exhibit excellent exterior durability, toughness, and flexibility, as well as the non-yellowing properties typical of an aliphatic urethane.

EBECRYL® LEO 10553 is a low viscosity polymeric amine modified polyether acrylate that provides low extractables, low odor and low migration and after UV or EB curing. EBECRYL® LEO 10553 is recommended for use in low odor and low migrating UV overprint varnishes (OPV’s) and inks for indirect food packaging applications.

TEGO® VariPlus CA N shows excellent viscosity reduction and helps accelerate drying speed. It provides very good adhesion on metal combined with high gloss and good weather resistance.

TEGO® DISPers 650 is a non-ionic wetting and dispersing additive that can be used in waterborne and solventborne formulations and in universal colorants. Especially for organic pigments;providesexcellent color strength development.

EBECRYL® 3700 is the diacrylate ester of a bisphenol A epoxy resin, and exhibits low odor and exceptional cure response. Films of EBECRYL® 3700 cured by ultraviolet light (UV) or electron beam (EB) demonstrate high surface hardness, high gloss, and excellent chemical resistance. EBECRYL® 3700 finds broad use in UV/EB applications, such as coatings, overprint varnishes, inks, adhesives, and electronics.

EBECRYL® LEO 10551 is a low viscosity amine modified polyether acrylate oligomer that provides low extractables, low odor and low migration after UV or EB curing.EBECRYL LEO 10551 is recommended for use in low odor and low migrating UV overprint varnishes (OPV’s) and inks for indirect food packaging applications.

Pale 4 polymerized castor oil oxidative polymerization of castor oil yields products with increased viscosities and decreasing solubility in aliphatic solvents. Pale 4 polymerized castor oil is used to plasticize a variety of resins in adhesive and sealant systems, inks and hot melts. It is a processing aid and plasticizer for rubber polymers.

EBECRYL® 640/20 TO is a modified diacrylate ester of bisphenol A epoxy resin. This product is characterized by its light color, fast cure response and improved pigment wetting. Films of EBECRYL®640/20 TO cured by ultraviolet light (UV) or electron beam (EB) exhibit high surface hardness and gloss and the excellent solvent resistance typical of an epoxy resin. EBECRYL®640/20 TO finds broad use in UV/EB applications, such as inks, coatings and overprint varnishes.

TEGO® DISPers 705 is a wetting and dispersing additive for solvent borne formulations. Stabilitzes inorganic pigments, fillers and bentonites. Can be used to produce very stable and easy to handle pastes of bentonites.

SURFYNOL® 104 Z is a multifunctional surfactant providing combined dynamic wetting and molecular defoaming in waterborne coatings and inks.

EBECRYL® LEO 10801 is a hexafunctional polyester acrylate oligomer that provides high reactivity and the proper ink water balance necessary for good lithographic printing. Lithographic inks based on EBECRYL® LEO 10801 display excellent rheological properties ensuring good ink transfer from the printing plate to the blanket and then to the substrate, combined with good dot definition. EBECRYL® LEO 10801 has been specifically developed to formulate UV/EB curable inks with low extractables and low odor for indirect food contact applications.

Pale 1000 Blown Castor Oil commonly known as blown oils have increasing viscosities resulting from oxidative and crosslink polymerization at the double bonds and hydroxyl groups. Oxidative polymerization of castor oil yields products with increased viscosities and decreasing solubility in aliphatic solvents, increasing compatibility with various resins and improved ability to wet and disperse pigments while imparting solvent and abrasion resistance to lacquer systems. The polymerized oils are used to plasticize a variety of resins in adhesive and sealant systems, inks and hot melts. The heavier viscosity polymerized oils are processing aids and plasticizers for rubber polymers, imparting oil and solvent resistance.

EBECRYL® 889 is an energy curable polyester acrylate for publication inks. EBECRYL® 889 provides good pigment wetting and color development for process color inks. Inks made with EBECRYL® 889 exhibit good adhesion to super- calendared paper, good ink transfer and excellent printability.

EBECRYL® 452 is a low viscosity polyester acrylate oligomer that exhibits exceptional pigment wetting properties making it an ideal pigment grinding resin. EBECRYL® 452 also gives a fast cure response when formulated with other oligomers and cured via ultraviolet light (UV) or electron beam (EB). EBECRYL® 452 is used for the preparation of highly loaded pigment pastes produced using 3-roll or bead mills. EBECRYL® 452 can be used for grinding all process colors and spot colors.