Products

TERMIX® 5225 is a solution containing a blend of anionic and nonionic surfactants. It is a clear amber, low viscosity liquid, free of suspended material.

NPG(PO)2DA is useful as a reactive diluent in formulating ultraviolet light (UV) and electron beam (EB) curable coatings and inks. NPG(PO)2DA provides efficient viscosity reduction of viscous resins, good flow and wetting, and greater flexibility than other common difunctional acrylate diluents.

EBECRYL® 4765 is an isocyanate functional aliphatic urethane acrylate supplied in ethyl acetate and designed for use in UV/EB coatings and in two component dual cure systems for coatings on wood, plastic and metal.

EBECRYL® 4266 is a Unsaturated aromatic epoxy acrylate. In the formulation of UV-curing and EB coatings. Without reactive thinner.

EBECRYL® P39 is a polymeric benzophenone derivative that functions as the photosensitizer in hydrogen abstraction type radical photoinitiator systems. EBECRYL® P39 has been designed for use in the formulation of UV coatings that exhibit little or no odor after curing. Recommended levels are from 8 to 10% based on total formulation. EBECRYL® P39 should be used in combination with amine co-initiators such as EBECRYL® P115 or EBECRYL® 7100, or with amine modified acrylate resins. EBECRYL® P39 is a polymer preparation manufactured in the European Union with (pre)registered monomers/reactants and REACH compliant.

RHOPLEX® 2500 is designed for tough, water-resistant masonry paints and primers. Coatings based on RHOPLEX® 2500 possess very good adhesion to masonry substrates, excellent durability (gloss and tint retention, and dirt pickup resistance), and the ability to retard efflorescence in cured cementitious products.

PARALOID™ A-21 100% Resin imparts excellent intercoat adhesion, hardness, and outdoor durability. It has the same composition and characteristics as the solution grade, while providing wider formulating latitude.

Thetawet™ FS-8150 is a nonionic surfactant used in caulks, home care applications such as bottle wash, degreasers, floor cleaners, and household cleaners, as well as in industrial and institutional cleaning including bottle wash, degreasers, and industrial cleaners.

MAINCOTE™ 4950 Resin is an aqueous acrylic emulsion polymer that facilitates the formulation of coatings to less than or equal to 50 g/L VOC for use in light to medium duty maintenance and protective coatings applications and general industrial metal finishing applications. It offers excellent exterior durability and corrosion resistance, and ease of formulation with excellent paint stability. MAINCOTE 4950 Resin offers improved corrosion resistance versus current direct-to-metal (DTM) finish coats formulated below 100 g/L. It also offers good architectural gloss and trim paint properties. Low coalescent demand allows compliance with stringent VOC regulations.

Agimid® 141 B120-S is a plasticized, heat and light stabilized product with processing aid for extrusion. The main application is pneumatic tubes thanks to combination of cold impact, burst pressure and high aging resistances.

BS-1C-B27 is an organophilic clay designed for use in medium to high polarity systems.BS-1C-B27 imparts excellent rheology, particle suspension, and pigment anti-settling.

CYMEL® 1172 resin is an unalkylated glycoluril crosslinker supplied in water at 45% solids. It is designed to be used for crosslinking aqueous neutral or acidic hydroxyl or amide functional polymers and combines excellent stability at acidic pH (as low as 4) with excellent reactivity. CYMEL® 1172 resin cannot be used in amine neutralized or basic coating systems because of the potential problems of demethylolation of the compound and a significant decrease in cure response.

MACROLEX® Yellow 3G/OF is a dye used in plastics and elastomers.