Products

Bleumina® 219 is a series of Medium/High Color Furnace (MCF/HCF) blacks that provide excellent esthetics, along with high durability, in the final product. With very low particle size and a balance of structure, it exhibits good UV protection, high jetness, and gloss.

3M™ Boron Nitride Powder SCP1 functions as an intermediate in base chemicals applications.

BARIUM STEARATE SW has medium bulk density, fine white powder.

Roflex T70L is a flame retardant used in industrial additives and plastics and elastomers.

Bleumina® 361 is a series of Medium/High Color Furnace (MCF/HCF) blacks that provide excellent esthetics, along with high durability, in the final product. With very low particle size and a balance of structure, it exhibits good UV protection, high jetness, and gloss.

PC-1244™ Defoamer is a solution of organic polymer in a petroleum solvent. It enhances air release properties and prevents foam formation in acidic or neutral organic fluids at temperatures up to 400 °F. It also performs in some alkaline systems. It has demonstrated an ability to retain its defoaming capacity over extended periods of time. It works without materially affecting the surface tension of the media. PC-1244™ Defoamercontains no silicone. PC-1244™ Defoamer applications include usage in gear oils, specialty lubricants, and hydraulic, turbine and transmission oils. Typical use levels range from 20 ppm to 2000 ppm (0.2 %) on active solids.

Bayferrox® 610 is a single-ingredient inorganic pigment composed of iron and iron compounds. It has a pH range of 4-7, making it suitable for various applications in plastics and elastomers. This pigment enhances the color and properties of materials while complying with industry standards.

Rilsan® INVENT SP is a polyamide 11 (PA 11) resin used in plastics and elastomers applications.

BONDERITE® S-FN 329 ACHESON is a fast-drying, resin bonded, fluorocarbon dry film lubricant capable of coating wood, metal, rubber, plastic, and glass substrates. It is designed for low-friction, light load, repetitive stresses. Moving parts wear longer, work harder, and need less maintenance when coated with this product. BONDERITE® S-FN 329 ACHESON cures at room temperature, allowing application where conventional sintered PTFE coatings cannot be considered. The coefficient of friction (static) when the coating is properly applied ranges from 0.06 to 0.09. A coating thickness of 0.0002 to 0.0007 inches (0.0051 to 0.0178 millimeters) generally provides the optimum low friction properties. BONDERITE® S-FN 329 ACHESON is a liquid concentrate that can be diluted according to need. Although Emralon® products are not specifically designed as protective coatings, they do offer moderate resistance to chemicals.

Bayferrox® 522 is a high-quality inorganic iron oxide pigment, specifically iron(III) oxide. This pigment is commonly used for applications requiring reliable and stable color performance. It is free from the substances listed under California Proposition 65, ensuring compliance with relevant health and safety regulations. Bayferrox® 522 is well-suited for a variety of industrial uses, providing consistent color and durability.

Additin® RC 7110 is a single-ingredient antioxidant used in gear oils, hydraulic oils, metalworking fluids, and turbine & compressor fluids. It is odor-free and provides excellent oxidation stability, making it suitable for a range of lubricating applications, including gear oils, hydraulic fluids, and turbine oils.

ACRYSOL™ ASE-95NP is a single-ingredient acrylates copolymer thickener with water as a carrier. It is also known as ethyl acrylate-methacrylic acid copolymer.

TETRAMERE D4, or octamethylcyclotetrasiloxane, is described in CAS No. 556-67-2.

KRYSTOL™ 550 is a white mineral oil lubricant used as an internal lubricant in plastics and elastomers. It is also used in adhesives, sealants, fluids, and lubricants markets.