Products

AEROSIL®E 9200 is a structure modified, hydrophobic fumed silica. It enables high loading levels at low viscosities. It is very easy to disperse.

ACEMATT® OK 390 is a wax-treated, finer grade matting agent based on precipitated silica. Due toits high compatibility, it can be used in a large variety of coatings.

Bluesil™ FLD 47 V100 000 (viscosities 100000) is dimethylpolysiloxane polymers with linear chains.

TEGO® Wet 280 is a highly active siloxane-based substrate wetting additive. It shows good atomization for spray applications in co-solvent containing water borne formulations. It is compatible and recoatable.

AEROSIL® 300 Coating is a hydrophilic fumed silica with a specific surface area of 300 m²/g. It provides a very strong rheological effect.

TEGO® Wet KL 245 is a highly active siloxane-based substrate wetting additive. It shows very good substrate wetting properties on difficult substrates like wood and plastic. It is highly compatible and recommended for water borne and solvent borne coatings.

AEROSIL® 380 Coating is a hydrophilic fumed silica with a specific surface area of 380 m²/g

Hostavin® 3058 liq is a non-basic low molecular weight hindered amine light stabilizer (HALS), 100% liquid, characterized by its excellent solubility, broad compatibility in all kind of liquid paints, with low volatility and excellent stabilization efficiency.

AEROSIL® 200 V is a densified hydrophilic fumed silica with a specific surface area of 200 m²/g.

BONDERITE® S-FN TM-001A is one of a series of Henkel resin-bonded coatings designed to provide dry film lubrication and release in a variety of industrial and consumer applications. A flexible, water- based coating specially designed for flexible substrates, BONDERITE® S-FN TM-001A is a resin-bonded PTFE lubricant that prevents binding, seizing, sticking, and tearing of rubber and plastic parts during production and assembly. BONDERITE® S-FN TM-001A provides a clean dry film that protects substrates from oil, alcohol, gasoline, some inorganic acids, abrasive substances, dirt, and contaminants for longer wear life and reduced maintenance. BONDERITE® S-FN TM-001A is an ideal low-friction coating for substrates where operational flexibility is a major consideration. BONDERITE S-FN TM-001A (known as EMRALON TM-001A) can easily be tinted with a variety of color pigments for easy identification of parts.

TEGO® AddBond HS improves adhesion and flexibility of solvent borne coatings on steel, galvanized steel, aluminum, and plastics. It is highly suitable for high-solid coatings.

AEROSIL® R 9200 is a structure modified, hydrophobicfumed silica.

BONDERITE® S-FN GP 1904 is a dispersion of PTFE and graphite in a thermosetting binder designed to be applied by spray, brush, or dip. BONDERITE® S-FN GP 1904 produces a low friction coating with excellent resistance to corrosion and solvents. The wide range of cure temperatures 149 to 260°C allows BONDERITE® S-FN GP 1904 to be used on wood, rubber and many plastics and on engineering metals. BONDERITE® S-FN GP 1904 is a one-package product and is not affected by low temperature storage conditions.

Bluesil™ FLD 47 V12 500 (viscosities 12500) is dimethylpolysiloxane polymers with linear chains.

BONDERITE® L-GP 154 RFU a specially processed colloidal graphite dry film lubricant, air dries rapidly at room temperature and adheres tenaciously to most substrates with minimum surface preparation. The thinness of the coating, coupled with high lubricity, provides clean, long-wearing lubrication without redesign of component dimensions. Supplied in Ready-For-Use form, coatings are easily applied during manufacture or assembly by standard spray techniques. BONDERITE L-GP 154 RFU ACHESON (known as DAG 154 RFU) is also an easy-to-apply resistance coating designed to provide conductivity, and excellent release properties to many nonconductive substrates, including most plastics.